Shure 527B
527B Handheld Paging/Dispatch Microphones

527B

The 527B is wired for balanced-line operation and is recommended for use where long cable lengths are required, or areas where strong noise fields may exist. The 527B microphone can be fed directly into a standard low-impedance amplifier, or a Shure A95 Series Line Matching Transformer can be used for coupling the 527B to the input of a high-impedance amplifier. A two-conductor shielded cable can be used for extending only the microphone circuit. If both the microphone circuit and the remote circuit are to be extended, a four-conductor cable, having two shielded conductors for the microphone, should be used.

• • Extended low- and high-frequency response
• • Highly intelligible voice response
• • Unparalleled ruggedness and reliability
• • Moving coil (dynamic) element
• • ARMO-DUR case
• • “Million-Cycle” leaf-type switch controlling microphone and external relay or switching circuits
• • Modular construction for easy field service
• • “Lifetime” hang-up button and mounting bracket
• • Long-life neoprene-jacketed coil cord

• Type: Dynamic
• Frequency Response: 300 to 5,000 Hz
• Sensitivity (at 1,000 Hz), Open Circuit Voltage: -53 dBV/Pa
• Impedance: Microphone impedance rating is 150 ohms (200 ohms actual) for connection to microphone inputs rated at 19 to 300 ohms
• Switch: Double-pole, single-throw, leaf-type
• Cable: Attached, 1.8 m (6 ft), 4-conductor (2 shielded), neoprene-jacketed
• Dimensions
• Length: 3.688" (9.37 cm)
• Width: 2.625" (6.67 cm)
• Depth: 1.765" (4.48 cm)
• Net Weight: 337 g (11.9 oz)
• Packaged Weight: 533 g (18.8 oz)
• Furnished Accessory: Mounting Bracket

Our Part #  527B