AKG C562CM
Microphone, Ceiling Mount, Phantom powered

C562CM

The C 562 CM offers the inherent features of a boundary layer microphone: 6-dB higher sensitivity and elimination of comb filter effects when mounted in a large reflecting surface. Its response is uniform to 20kHz, and the polar pattern is omnidirectional. A-weighted signal-to-noise ratio is a remarkable 78 dB.

The microphone’s small size makes it ideal for flush-mount installation in any plane surface in a performing environment, including ceilings, walls and stage sets. Its 10 ft. (3 m) attached cable terminates in a 0.125 in. (3.5 mm) male jack, which fits through a 0.5 in. (12.7 mm) mounting hole. An accompanying phantom power adapter provides an electronically balanced low impedance output via a 3-pin XLR-M connector.

Features

• Small & inconspicuous
• Wide frequency range
• High sensitivity

Specifications

• Transducer Principle: Condenser prepolarized
• Frequency Range: 20-20,000 Hz
• Polar Pattern: Omnidirectional
• Sensitivity at 1,000 Hz: 25 mV/Pa (-34 dBV)
• Equivalent Noise Level: < 16 dB-A
• Sound Pressure Level for 1% THD: 130 dB
• S/N Ratio (A-weighted): > 78 dB
• Electr. Impedance: < 600 ohms
• Load Impedance: > 2000 ohms
• Power Requirement: 9–52 volts phantom powering
• Connector: 3-Pin XLR-type
• Cable Length: 10 ft. (3 m)
• Finish: Satin nickel
• Size: 0.8 in.dia./1.1 in. length (20 mm dia./28 mm length)
• Net/Shipping Weight: 1.1/6.9 oz. (30 g/195 g)
• Special Features/Applications: Boundary layer microphone
• Included Accessories: Phantom power adapter
• Optional Accessories: B 18 Battery power supply

Our Part #  C562CM