QSC CX204V 4-Channel Powered Amplifier, 200W, 70V Output (CX254 shown)

QSC CX204V
4-Channel Powered Amplifier, 200W, 70V Output (CX254 shown)

View all QSC products

4-Channel Powered Amplifier, 200W, 70V Output (CX254 shown)

QSC CX204V

The new 4-channel CX amplifiers give you four channels in only two rack spaces - without compromising on power. With high output power, versatile loading options, high thermal capacity and unmatched reliability, the CX Series is the perfect solution to any permanently installed sound system.

With PowerWave technology, CX amplifiers take your sound to a whole new level. Not only does it give you tighter bass and clean transparent highs, PowerWave also cuts waste heat, boosts reliability and gets rid of unwanted noise and hum. PowerWave is a revolutionary switching power supply technology that provides ample current to the audio power circuitry by charging the supply rails 230,000 times a second through an ultra-low impedance circuit. So unlike amplifiers that use conventional supplies, the audio signal is never starved prematurely and remains crisp and clean.

Power

70V, Stereo Mode, Both Channels Driven, 20Hz-20kHz,0.05% THD: 200W
70V, Stereo Mode, Both Channels Driven, 1kHz0.05% THD: 220W
70V, Stereo Mode, Both Channels Driven, 1kHz, 1% THD:300W
140V, Bridged Mono Mode, 20Hz-20kHz, 0.05% THD: 400W
140V, Bridged Mono Mode, 1kHz 0.05% THD: 440W
140V, Bridged Mono Mode, 1kHz, 1% THD: 600W

Specifications

Input Impedance: 6k ohms unbalanced, 12k ohmsbalanced
Input Connectors, each channel: 3 position Euro-styledetachable barrier block, Ch 1, 2, 3 & 4
DataPort: HD-15 Connector, Ch 1+2, 3+4
Output Connectors, each channel: Six-position barrierstrip with monitor connections, Ch 1+2, Ch 3+4
Amplifier Protection: Full short circuit, opencircuit, thermal, ultrasonic, and RF protection. Stable into reactive ormismatched loads
Load Protection: On/Off muting, DC-fault power supplyshutdown
Dimensions (W x H x D): 19" x 3.5" x 14" (2 RU)
Weight: 21 lbs net, 27 lbs shipping

TMGR# CX204V

	QSC DSP3 Digital Signal Processor After three decades of developing pioneering audio products and systems, QSC raises the bar once again, setting a new standard in signal processing with the new DSP-3 Digital Signal Processing Module.The DSP-3's two channels of independent ... Usually ships in 1-2 business days List Price: $561.00 Our Price $450.00 You save 20%! Usually ships in 1-2 business days	Free Shipping
	QSC DSP4 Digital Signal Processing Module for QSC Amplifiers With more than three decades of experience pioneering cutting edge audio products, QSC raises the bar once again with the DSP-4 Digital Signal Processing Module. This compact module offers two channels of independent DSP and attaches to ... Usually ships in 2-3 weeks List Price: $711.00 Our Price $570.00 You save 20%! Usually ships in 2-3 weeks Need it sooner? Call us!	Free Shipping
	QSC DPX4 Remote Rack Mounting Bracket for DSP-3 & DSP-4 The DPX-4 allows remote rack mounting of QSC DataPort-compatible accessory modules such as the DSP-3 and DSP-4 digital signal processors. The bracket allows accessory modules to be used in a standalone configuration with QSC four-channel, ... Usually ships in 2-3 weeks List Price: $85.00 Our Price $70.00 You save 18%! Usually ships in 2-3 weeks Need it sooner? Call us!
	QSC LF3 Low Frequency Filter for QSC Amplifiers The LF-3 Low-Frequency filter, when used with the XC-3 two-way crossover, provides the low-frequency crossover to create a three-way active system. The unit mounts to the rear panel of a two-channel DCA or CX amplifiers to save cost and ... Usually ships in 2-3 weeks List Price: $208.00 Our Price $165.00 You save 21%! Usually ships in 2-3 weeks Need it sooner? Call us!	Free Shipping
	QSC SF3 Subwoofer Filter for QSC Amplifiers The SF-3 subwoofer filter allows the addition of subwoofers to an existing full-range system, offering adjustable low-pass filtering and high-pass subsonic filtering with optional B6 boost and mono-summing. The unit mounts to the rear ... Usually ships in 2-3 weeks List Price: $208.00 Our Price $165.00 You save 21%! Usually ships in 2-3 weeks Need it sooner? Call us!	Free Shipping
	QSC SEQ2 5-band Stereo EQ for QSC Amplifiers The SEQ-2 is an embedded accessory that provides two independent channels of graphic equalization. Five trimpots on each channel adjust boost and cut—up to ±12 dB—at 40 Hz, 160 Hz, 630 Hz, 2.5 kHz, and 10 kHz. Each band has a Q of ... Usually ships in 2-3 weeks List Price: $76.00 Our Price $60.00 You save 21%! Usually ships in 2-3 weeks Need it sooner? Call us!
	QSC XF1 Input Isolation Transformer for QSC Amplifiers The XF-1 is an internally mounted, high-quality, high-bandwidth input isolation transformer accessory for QSC amplifiers. Custom made for QSC by Jensen, it provides superb common-mode noise rejection for high-performance sound systems.The ... Usually ships in 2-3 weeks List Price: $74.00 Our Price $60.00 You save 19%! Usually ships in 2-3 weeks Need it sooner? Call us!
	QSC BSC7 BusCard Signal Processing Accessory for QSC Amplifiers For 4-channel CX and DCA models. Accomodates two embedded signal processor cards- one for channels 1 and 2, and the other for channels 3 and 4- and up to four XF-1 Input Isolation Transformers. Usually ships in 2-3 weeks List Price: $116.00 Our Price $95.00 You save 18%! Usually ships in 2-3 weeks Need it sooner? Call us!	Free Shipping