Audio Technologies Inc. PB2X8
Press Box, Microphone/Line Mixer, Distribution Amplifier, 2x8

PB2X8

The PB2X8 provides two high quality XLR inputs, which can be individually switched or mixed into any of eight isolated line level outputs. Each input may be individually switched for microphone or line levels with phantom power and low cut filters available for the microphone inputs. A calibrated test tone oscillator can be switched in place of either input for system test and level checks.

A bargraph LED display meters any of the eight outputs or either input. The meter may be switched for 0VU indication at nominal outputs of +4, +8 or +18dBm with the top position an effective headroom indicator. A headphone output follows the meter selection for audible monitoring.

Each of the eight outputs is a seperate, independent and isolated amplifier channel which may be switched to the A input, the B input or to the A+B sum to mix both inputs. Each output channel has its own level control and a transformer balanced and isolated XLR output at full line level. In addition, alternate output positions provide either a 1/4 inch or a 3.5mm TRS jack with an attenuated output at -10dBu. Internal jumper plugs can convent any -10 output to -50dBu. Balanced TRS (Tip-Ring-Sleeve) plugs or unbalanced TS (Tip-Sleeve) plugs may be used interchangeably. A pair of 1/4 inch TRS jacks parallels the main XLR inputs to allow convenient loop-thru connection into another PB2 X 8 for futher system expansion.

Features

• Two low noise Mic /Line inputs
• Phantom power, low cut filter
• Loop thru expansion inputs
• Calibrated test oscillator
• Switchable bargraph VU meter
• XLR, 1/4" and 3.5mm TRS jacks
• Headphone output

Our Part #  PB2X8