Crown PZM-30D
PZM microphone (PZM-30D shown).

PZM-30D

The PZM (Pressure Zone Microphone) is ideal for recording critical music or voices. The PZM-30D has integral XLR output connector, the PZM-6D has hard wire output. Both have flat or rising response switchable. Phantom power only.

Features

• Pressure Zone Microphone design prevents coloration from surface sound reflections
• Choice of flat response or rising highfrequency response
• PZM-30D uses a rugged detachable cable
• PZM-6D is smaller, lighter, and has a permanently attached cable
• Hemispherical pickup pattern

Specifications

• Type: Pressure Zone Microphone.
• Transducer: Electret condenser.
• Frequency response: 20 Hz to 20 kHz.
• Polar pattern: Hemispherical when used on a floor, wall or ceiling.
• Open circuit sensitivity: 7 mV/Pa (–43 dB re 1 volt/Pa).
• Power sensitivity: –43 dB re 1 mW/Pa. EIA sensitivity –135 dBm.
• Impedance: 240 ohms, balanced. Recommended minimum load impedance 1000 ohms.
• Self-noise: 20 dB equivalent sound pressure level, A-weighted.
• S/N ratio: 74 dB at 94 dB SPL.
• Maximum Sound Pressure Level: 150 dB SPL at the microphone produces 3% THD.
• Polarity: Positive pressure on the diaphragm produces positive voltage on pin 2 with respect to pin 3 of the output connector.
• Operating voltage: Phantom power, 12 to 48 volts DC, positive voltage on pins 2 and 3 with respect to pin 1 of the output connector.
• Current drain: 1.1 mA.
• Connector: Male 3-pin XLR-type.
• Cable:
  • PZM-30D: None supplied; use 2-conductor shielded microphone cable.
  • PZM-6D: Permanently attached 15-foot (4.58-m) black cable with XLRM connector.
• Switch: Frequency-response select switch for rising or flat response.
• Color: Black.
• Weight: 6.5 ounces (184 grams).
• Dimensions:
  • PZM-30D: 6 in. x 5 in. x .75 in. (15.2 cm x 12.7 cm x 1.9 cm).
  • PZM-6D: 3 in x 2.5 in. x .375 in. (7.62 cm x 6.35 cm x .95 cm).
• Included accessories: PZM windscreen, carrying pouch.
• Optional accessories:
  • PH-4B phantom power supply (4 channels, AC powered).
  • PH-1A phantom power supply (1 channel, battery or AC-adapter powered).

Our Part #  PZM30D