• Type: actively balanced
• Level: adjustable 0 dBm to +10 dBm, maximum output +22 dBm
• Impedance: 100 ohms
• Distortion: .008% at nominal operating level, 20 Hz to 20 kHz, Pgm, Aud and Mono outputs signal to noise: 88 dB (or better) below +4dBm with 0 dBv input level, 20 kHz bandwidth, 600 ohm source impedance (line to line) 74 dB (or better) below +4 dBm output with -50 dBv input level, 20 kHz bandwidth, 150 ohm source impedance (mic to line)
• Frequency response: +/- .2 dB 20 Hz to 20 kHz

Level: 1 volt rms nominal, 10 volts rms maximum, balanced

• Level: 1 volt rms nominal, 10 volts rms maximum into 600 ohm headphone
• Distortion: .05% typical, .1% maximum
• Impedance: 50 ohms to front panel jack, 330 ohms to prefader (externalamp) output

2 watts rms into 8 ohm speaker

• Copy stand
• StudioHub+ Harness
• Source cables - specify length and type
• Spare power supply
• Additional clock/timer (rs-18a andrs-24a models only)
• Additional meter (rs-18a and rs-24a models only)
• Auxiliary relay

• Selector logic card
• Basic remote interface card
• Enhanced remote interface card
• Squawk box card
• Squawk box speaker
• Four source switcher card
• DA card
• Dual mix-minus board
• Four output mix-minus boards
• IFB switcher
• Colored fader knobs