Radio Design Labs ST PA2 2-Watt Utility Power Amplifier

Radio Design Labs ST-PA2
2-Watt Utility Power Amplifier

View all Radio Design Labs products

Radio Design Labs ST-PA2

The ST-PA2 is a utility power amplifier in the convenient line of STICK-ON products from Radio Design Labs. The durable bottom adhesive permits quick, permanent mounting nearly anywhere, or use it with RDL's racking accessories. The ST-PA2 gives you the advantages of a utility amplifier with the added convenience of STICK-ONs!

The ST-PA2 represents the second-generation in RDLs breakthrough in the traditional power vs. size ratio. Present technology permits features and performance at the most economical cost ever. The ST-PA2 offers 2 Watts of power...twice the power of most utility amplifiers...for a price you would expect to pay for 1 Watt!

The ST-PA2 features a single, unbalanced audio input...a gain control...and two outputs. The first output is designed to deliver a clean 2 Watts RMS into an 8 ohm speaker. The second output is intended to drive 600 ohm transformers, typically on equipment inputs. This makes the ST-PA2 uniquely suited for applications such as music-on-hold inputs on telephone systems which may have either 8 ohm or 600 ohm inputs. If desired, both outputs may be used at the same time.

The convenience and low cost of the ST-PA2 make it the ultimate choice as a building block in many systems...from simple to complex. It may be used in combination with other STICK-ONs to form custom intercoms or talk-back systems...or can be used by itself to drive a single speaker with music or voice. For both straightforward or creative applications requiring a utility power amplifier, the ST-PA2 is the optimum choice!

Note: The ST-PA2 is not intended to drive long 600 ohm audio lines or multiple equipment inputs. For these applications, see STA-1 (stereo) STA-1M (mono), or ST-DA3 (distributed). If balanced audio input is required, see ST-PA6 audio power amplifier.

	Radio Design Labs PS24A Power Supply, 24 Vdc @ 400 mA 24 VDC power supply for use with Radio Design Labs audio equipment. Usually ships in 1-2 business days List Price: $27.48 Our Price $20.85 You save 24%! Usually ships in 1-2 business days
	Radio Design Labs MB1-RDL Mounting Kit for STICK-ON, TX, or Rack-Up module Two mounting brackets mounts a STICK-ON, TX, or Rack-Up module to a flat surface. Usually ships in 1-2 business days List Price: $3.62 Our Price $3.11 You save 14%! Usually ships in 1-2 business days
	Radio Design Labs MB3-RDL Kit to Mount ST, TX Series Modules on FP Panel TX or STICK-ON Module fastens to MB-3 which slides into FP-RRA/H track. Usually ships in 2-3 weeks List Price: $6.08 Our Price $4.61 You save 24%! Usually ships in 2-3 weeks Need it sooner? Call us!
	Radio Design Labs RC1U Universal Rack Chassis, 3 Units RC-1U Holds Up To 6 RACK-UP Products or 12 STICK-ON Modules. RACK-UPs, STICK-ONs and Accessory Panels May Be Installed in Unlimited Combinations. Usually ships in 1-2 business days List Price: $167.38 Our Price $127.05 You save 24%! Usually ships in 1-2 business days
	Radio Design Labs RURA3A 19" Rack Adapter, multi The RU-RA3A permits the mounting of five STICK-ON modules together with three RACK-UP modules. If AMS accessories are mounted in the RACK-UP mounting spaces, then up to 10 STICK-ON modules may be secured to the RU-RA3A shelf. Usually ships in 1-2 business days List Price: $75.68 Our Price $57.44 You save 24%! Usually ships in 1-2 business days
	Radio Design Labs SMK-12 Mounting Strip for STICK-ON Units The SMK-12 allows removable surface (up to 6 units) or edge (typically 12, max. 16) mounting of STICK-ON units. They can be fastened to its surface using screws or adhesive foam pads. Usually ships in 2-3 weeks List Price: $33.25 Our Price $25.25 You save 24%! Usually ships in 2-3 weeks Need it sooner? Call us!
	Radio Design Labs SR-10 Stick-On Mounting Rack for 10 Units The STR-10 Racking System holds up to 10 STICK-ON units. It holds STICK-ONs at an angle allowing for control adjustment from either the edge of a STICK-ON, or the top (depending on where the adjustment is located on the STICK-ON ... Usually ships in 2-3 weeks List Price: $77.96 Our Price $59.18 You save 24%! Usually ships in 2-3 weeks Need it sooner? Call us!
	Radio Design Labs SR12A Stick-On Mounting Rack/Up to12 SR-12A chassis can be mounted in a rack or on a backboard to provide mounting of 12 STICK-ONs. Usually ships in 2-3 weeks List Price: $77.96 Our Price $59.18 You save 24%! Usually ships in 2-3 weeks Need it sooner? Call us!
	Radio Design Labs SR4 Mounting Frame for Stick/TX The SR-4 is a universal module chassis that can mount to a backboard, wall or nearly any other support. It provides mounting for 4 STICK-ON power amplifiers or 7 standard STICK-ON modules. TX ™ modules may also be mounted. There is ample ... Usually ships in 2-3 weeks List Price: $100.88 Our Price $76.56 You save 24%! Usually ships in 2-3 weeks Need it sooner? Call us!
	Radio Design Labs STR19A Rackmount System for 12 Stick-On Units The STR-19A Racking System holds up to 12 STICK-ONs in a 19 inch rack and only occupies two rack spaces. Usually ships in 2-3 weeks List Price: $162.81 Our Price $115.35 You save 29%! Usually ships in 2-3 weeks Need it sooner? Call us!
	Radio Design Labs STR-19B Rackmount Kit for 10 Stick-On Units The STR-19B Racking System holds up to 10 STICK-ON unitss in a 19 inch rack and only occupies two rack spaces. The STR-19B holds STICK-ONs at an angle allowing for control adjustment from either the edge of a STICK-ON, or the top ... Usually ships in 1-2 business days List Price: $192.62 Our Price $136.44 You save 29%! Usually ships in 1-2 business days
	Radio Design Labs UC1 Utility Chassis, Single The UC-1 is an ULTRASTYLE design tabletop chassis for mounting RDL modules and accessories. The front panel features a single RACK-UP mounting bay. The rear panel has an identical mounting bay and is supplied with matching filler panels. ... Usually ships in 2-3 weeks List Price: $102.05 Our Price $77.46 You save 24%! Usually ships in 2-3 weeks Need it sooner? Call us!
	Radio Design Labs WDG1 Table-Top Wedge-Mount Enclosure WDG1 Holds 1 RACK-UP and 2 STICK-ON Modules. Front-panel LED Can Be Used To Indicate Power or Anything Desired! Usually ships in 2-3 weeks List Price: $122.67 Our Price $93.11 You save 24%! Usually ships in 2-3 weeks Need it sooner? Call us!
	Radio Design Labs DRA-35S Din Rail Adaptor for STICK-ON The DRA-35S is a 35 mm DIN rail mounting bracket that provides positive mounting for any RDL STICK-ON® module. The oblique mounting angle of the DRA-35S allows an installer to mount several STICK-ON modules to a single DIN rail. Access to ... Usually ships in 2-3 weeks List Price: $20.36 Our Price $15.45 You save 24%! Usually ships in 2-3 weeks Need it sooner? Call us!