Goldline TS1-RMX
Rack-Mount Balanced Audio Test Set

TS1-RMX

Features:

• Inputs:Electronically balanced XLRs mounted on both front and rear panels. Isolatedfrom chassis ground and sharing common ground with the outputconnectors.
• Input Impedance: TS1RMX 100kohms
• Input Selector: Selectbetween monitoring the Internal Oscillator at the Output Connector or anExternal Signal at the Input Connector.
• Outputs: Electronicallybalanced XLRs mounted on both front and rear panels. Isolated from chassisground and sharing common ground with the input connectors. The front and rearoutputs are driven independantly.
• Front/Rear Selector: Selectbetween monitoring the front or rear panel connectors.

Specifications

• Display: 4 digit via 7segment LEDs.
• Connectors: TS1RMX - XLR 3pin .
• Power Requirements: 115Vac@ 60Hz (50Hz internally strappable), 220Vac available
• Approvals:
  -Emissions: - EN 55022 B - FCC Class B
  -Immunity: - EN 55024 B
• Size: 19" W x 1.75" H x 7"D
• Weight: 3lbs.
• Case Material: Paintedaluminum

The Low Distortion Oscillator:
A current controlled, state-variable true sine wave oscillator incorporating a fast AGC circuit. Distortion components are typically 0.1% 2nd and 0.05% 3rd which are low order and not audible making the TS1RMX useful in making listening tests where a function generator would generate undesirable, audible side effects. Full frequency sweeps can be made from 20Hz - 20kHz in a single range. These units have no amplitude changes over the entire frequency range.

• Frequency range: 10Hz -27kHz
• Accuracy: ± 0.1dB from 20Hz -20kHz.
• Output impedance: 63.2 ohms(balanced).
• Adjustable output level: -60dBv to+24dBv ref: (0.775V)
• Maximum output level: +24dBv @ 2k ohmor greater, +22dBm @ 600 ohms.
• Distortion: < 0.3% THD

The Frequency Counter:
The frequency counter is internally connected to the internal oscillator and displays the oscillator frequency until a signal is plugged into the input connector. It then displays the frequency of the input signal. This unique combination allows absolute precision in setting frequencies.

• Frequency response: 1Hz -99.99kHz
• Input impedance: > 100kohms (electronically balanced).
• Input level: -40dBv to +24dBv ref: (0.775V)

The dB Meter:
The dB meter is a wideband average responding AC voltmeter. The circuit output is converted to dB for display. Direct reading dB greatly simplifies alignment procedures.

• Meter Range: -70dBv to+24dBv ref: (0.775V)
• Accuracy: ±1.5dB from 20Hz- 20kHz @ 50dBv
• Adjustable zero reference:-10dBv to +8dBv (rear panel adjustment)

Our Part #  TS1RMX