Panasonic WVCU204

The Panasonic Camera Control Unit WV-CU204 allows you to remotely control the various camera functions of the WV-BL600 series and WV-CL700 series cameras by sending the multiplexed control signal using a single coaxial cable for composite video signal.

The unit also displays the camera status on the video monitor by characters and LEDs on the front panel. In addition, two or three camera control units may be used in series connection to make possible the multi-control application.

Note: As this unit multiplexes the control signal on the vertical blanking period, equipment that utilize a similar multiplexing method may not function properly when connected to this unit.

• Remote control for setting functions of WV-BL600 and WV-CL700 series cameras.
• Multiplexed control signal on the composite video signal with single coaxial cable
• Camera status can be displayed by characters and LEDs.
• Up to four cameras can be controlled (four camera inputs)
• One composite video output for the selected video output signal.
• One monitor video output for the superimposed status character display.
• Four camera outputs for the connection of the second or third camera control unit for multi-control application with the ON/OFF switch for the multiplexed control signal.
• Cable loss compensation with three position switch for the cable length.
• Switch Lock on/off selection to prevent erroneous operation.
• Controllable camera functions are:
• Electronic Shutter on/off selection
• Electronic shutter speed selection
• Maximum level selection for the Auto Electronic Sensitivity
• Up Mode
• Level selection for manual electronic sensitivity up mode
• Electronic zoom on/off selection
• Zooming area selection for electronic zoom
• Iris control for specified lens

TMGR# WVCU204