Rolls RA2100B
100W RMS/Channel @ 4 Ohms Stereo Amplifier (200W into 70V Bridged or 8 Ohms Bridged)

RA2100B

The RA2100b is an ideal installation amplifier for small to medium sized applications. The unit is built solid and housed in a painted steel chassis. It also includes special high performance transformers and a fused power line. The MOSFET output stage is fault protected which allows the R2100b to forgive momentary output shorts. It is designed to drive 4 or 8 Ohm speakers, 25V speakers (individual channels) or 70V speakers (in bridged mode). CAUTION: The 2100b is convection cooled. Adequate ventilation room for the heat sink fins on the rear panel must be provided for.

Features:

• 100 Watts RMS per output (4 Ohm)
• 85 Watts RMS per output (8 Ohm)
• 200 Watts RMS into 70 Volt (8 Ohm)
• 1/4" and RCA inputs
• Fault Protected Output Stage

Specifications:

• Power Output, Stereo:
     * 100 Watts RMS/ch. 4 Ohms
     * 85 Watts RMS/ch. 8 Ohms
• Bridged: 200 Watts into 70 Volt or 8 Ohms
• Minimum Load Impedance: 4 Ohms (8 Ohms bridged)
• Sensitivity: <1 VRMS for full output
• THD: <.05% (500 Hz @ 1 Watt)
• IMD:  <.05%
• S/N Ratio: >95 dB A Weighted
• Power Bandwidth:  70 - 30 kHz +/- 3 dB
• Damping Factor: >150
• Slew Rate: 100 V/microSecond
• Phase Shift: <10 Deg., 20 Hz - 20 kHz
• Input Impedance: 10 KOhms balanced
• Power: 120 VAC 60 Hz 2.5A, 230 VAC 50 Hz
• Dimensions: 19" x 3.5" x 7.5" (48 x 9 x 19 cm)
• Weight: 12 lbs. (5.5 kg)

Our Part #  RA2100B