Electro-Voice RE90HW

With the RE90H, EV has addressed the two critical problems associated with handing mics: natural sound quality and stay-in-place design. The polar properties of this microphone have been carefully designed to reproduce accurate sound from distant sources. Also the cable, which suspends the microphone, is manufactured to resist turning, so once you aim the microphone, you can have the confidence it will stay aimed. Other features include 25-foot cable, 3-pin XLR output connector, 75-15,000 Hz frequency response, and is available in low-gloss white or low-gloss black.

Features

• Non-reflecting black (RE90H) or low-gloss white (RE90WH) with matching cable.
• Shielded pre-amp is highly-resistant to electrical noise and radio frequency interference.
• 25-ft. braided, shielded cable maintains microphone's position (not rotation)
• Cardioid polar pattern
• Three-pin male XLR-type output connector fits with female bulkhead XLR-type connector

Specifications

• Generation Element: Condenser, back electret
• Frequency Response: 75 Hz to 15,000 Hz
• Polar Pattern: Cardioid
• Sensitivity, Open Circuit Voltage, 1 kHz: 27 mV/pascal
• Power Level, 1 kHz (0 dB = 1 mW/pascal): -30.4 dB
• Clipping Level (1% THD): 120 dB SPL
• Equivalent Noise: 25 dB SPL A weighted
• Dynamic Range: 95 dB
• Output Impedance, 1 kHz: 200 ohms
• Power Requirements: 9 to 52 V dc phantom supply
• Current Consumption: 2.0 mA
• Polarity: Pin 2 positive, referenced to pin 3, with positive pressure on the diaphragm
• Color: Low-gloss white
• Environmental Conditions
  • Relative Humidity 0-50%: -29° to 74°C (-20° to 165°F)
  • Relative Humidity 0 to 95%: -29° to 57°C (-20° to 135°F)
• Dimensions
  • Transducer: 12.7 mm (0.4 in.) diameter, 36.8 mm (1.45 in.) long
  • Microphone Cable: 7.6 m (25 ft) long
  • Electronics Module: 94 mm (3.7 in.) long, 19 mm (0.75 in.) diameter
• Net Weight: 157 grams (5.5 oz)
• Shipping Weight: 324 grams (11.4 oz)