Neumann M147-TUBE
Large Diaphragm Condenser Tube Microphone

M147-TUBE

Neumann's M 147 Tube is a vacuum tube condenser microphone with cardioid characteristic. At the heart of this microphone is the K 47 dual diaphragm capsule, inherited from this model's now legendary predecessors, the U 47 and the M 49. Following the capsule is a tube that functions as an impedance converter. The next stage is an efficient, transformerless output circuit, that guarantees an extremely low self-noise level.

The M 147 Tube can feed extremely long microphone cables without affecting the quality of the audio signal. Like all Neumann tube microphones, the M 147 Tube comes with an elegant satin nickel finish. The microphone is delivered as a complete set in a high-quality aluminum case. Included with the microphone are a microphone cable, a metal swivel mount for a mic stand, and a compact universal power supply for standard mains sockets. Our modern manufacturing methods makes it possible to offer this complete set at a very attractive price.

The famous capsule, together with complimenting tube characteristics, makes the M 147 Tube especially well suited as a vocal mic. In addition, it is a superb spot mic for all types of musical instruments. The extremely low self-noise of its tube circuitry makes the mic perfectly suited for use in modern recording chains, analog and digital.

The M 147 Tube is addressed from the side, where the microphone body has the diamond-shaped Neumann company logo. The black color identifies tube microphones. The capsule is equivalent to the one used in the U 47, and is the deciding factor in determining the sound characteristic. It has a flat frequency response to the upper midrange, and a boost of up to 3 dB above 2 kHz. The headgrille design is a smaller version of the U 47. It protects the capsule effectively against popping and wind noise.

The M147 Tube has a cardioid characteristic, leaning more toward super-cardioid due to its distinctive capsule design. At higher frequencies the pattern becomes more directional. This is very similar to the model after which this new tube microphone was patterned, the U 47 and the successor, the U 47 fet.

When compared to other microphones, the impedance converter used in the M 147 Tube is distinguished by its extremely low self-noise level of only 14 dB-A / 25 dB CCIR weighted. Similar to the recently introduced M 149 Tube, the new M 147 Tube combines a specifically selected vacuum tube (triode) with modern circuitry. This technique takes full advantage of the special transfer characteristics of the tube and passes the processed audio signal of the capsule to the microphone output, without any coloration or unwanted side effects. The tube amplifies the capsule's signal by approximately 10 dB, thus preventing any possible influences from subsequent electronics. The M 147 Tube delivers a high output voltage, and therefore can feed microphone cables up to 300 m length without signal degradation. The ideal operating conditions (anode current, heater voltage) of the tube are maintained throughout its life expectancy. A sensor lead detects any voltage drop that occurs through the microphone cable and compensates for it in the N 149A power supply. The tube warms up gradually using inverse current limiting to guarantee long life.

The electronic circuitry of the M 147 Tube mic has a flat frequency response from 20 Hz to well above 20 kHz. Only the attributes of the capsule determine the typical sound characteristics of the microphone.

Both the capsule and the entire circuitry are shock mounted to prevent any structure-borne noise. Because of its wide operating range, the M 147 Tube can reproduce extremely low frequency signals without distortion. This implies that the microphone may also be sensitive to unwanted LF interference by structure-borne noise, or wind noise. To avoid possible signal degradation, we offer the EA 1 elastic suspension and the WS 87 windscreen as accessories. During close miking of vocals we recommend using the PS 10 or PS 20 pop screen.

The N 149 A universal power supply works with all mains AC voltages from 100 V to 240 V, 50 or 60 Hz. Mains power is connected through a standard IEC 320 mains socket. The only difference between the three available versions of the M 147 Tube set is the power cord supplied.

NOTE: The N 149 and N 149 V power supplies that come with the M 149 Tube are fully compatible with the M 147 Tube microphone.

The M 147 Tube receives its operating power through the 8-conductor KT 8 microphone cable from the N 149A universal power supply. The microphone's audio output signal is available through a standard 3-pin XLR connector at the power supply. The microphone comes as a complete set, together with the KT 8 microphone cable, the N 149 A power supply, the SG 1 swivel mount stand adapter, and a cloth dust protector. The set is packaged in an attractive aluminum case suitable for carrying and storage.

Specifications:

• Acoustical operating principle: Pressure gradient transducer
• Directional pattern: Cardioid
• Frequency range: 20 Hz - 20 kHz
• Sensitivity at 1 kHz into 1 kOhm: 20 mV/Pa
• Rated impedance: 50 Ohms
• Rated load impedance: 1 kOhms
• Equivalent noise level, CCIR*: 24 dB
• Equivalent noise level, A-weighted*: 12 dB-A
• Signal-to-noise ratio, CCIR* (rel. 94 dB SPL): 70 dB
• Signal-to-noise ratio, A-weighted* (rel. 94 dB SPL): 82 dB
• Typical SPL (tube characteristic): 114 dB for THD < 0.5 %, 134 dB for THD < 5 %
  (measured as equivalent el. input signal )
• Maximum output voltage: 8 dBu
• Dynamic range of the microphone amplifier (A-weighted): 102 dB for THD < 0.5 %, 122 dB for THD < 5 %
• Powering: Power supply N 149 A
• Matching connector: Microphone: DIN 8F, Power Supply: XLR3F
• Weight: 460 g
• Diameter: 57 mm
• Length: 142 mm

*According to IEC 60268-1; CCIR-weighting acccording to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS

Our Part #  M147-TUBE