Radio Design Labs ST GLA1 Gated Line Amplifier

Radio Design Labs ST-GLA1
Gated Line Amplifier

ST-GLA1

The ST-GLA1 is part of a group of products in the STICK-ON series from Radio Design Labs. The durable bottom adhesive permits quick, permanent mounting nearly anywhere or it may be used with RDL's racking accessories. The ST-GLA1 offers the ultimate in totally solid-state automatic line-level gating, with a big plus, you can put it right where you need it!

The ST-GLA1 is a self-gated line amplifier designed to be used in a variety of situations where it is desired to produce an automatically switched line-level signal with integral noise reduction. This module may be used in conjunction with other RDL modules to configure automatic mixing systems or may be used alone as a noise gate. The open-collector output may be used to trigger other equipment or RDL modules. The versatility of ST-GLA1 applications range from complete automatic mixing system design to the addition of automatic gating to the inputs of conventional mixers or amplifiers to suppress accumulated or induced system noise.

The input and output may be wired balanced or unbalanced. Two LED indicators are provided for adjustment. One LED indicates the correct gain setting. The second indicator shows when the module is switched ON. Gain and threshold levels are adjusted using multi-turn precision trimmers.

The input gain adjustment has sufficient range to accommodate unbalanced consumer or balanced professional audio sources. The threshold adjustment permits setting the audio level at which the preamplifier output turns ON. Internal switching is solid- state and uses a soft-switch transition that sounds instantaneous without annoying clicks or edge transitions. When the audio drops below the preset threshold level, the module mutes 2 seconds later. In circumstances where a longer delay time is desired, an external capacitor may be connected to extend the delay.

Our Part # STGLA1

	Radio Design Labs MB1-RDL Mounting Kit for STICK-ON, TX, or Rack-Up module Two mounting brackets mounts a STICK-ON, TX, or Rack-Up module to a flat surface. Item is In Stock and should ship in 1-2 business days.	Our Price:$3.21 List Price: $3.78 You save 15%!
	Radio Design Labs MB3-RDL Kit to Mount ST, TX Series Modules on FP Panel TX or STICK-ON Module fastens to MB-3 which slides into FP-RRA/H track. Item is In Stock and should ship in 1-2 business days.	Our Price:$4.74 List Price: $6.36 You save 25%!
	Radio Design Labs RC1U Universal Rack Chassis, 3 Units RC-1U Holds Up To 6 RACK-UP Products or 12 STICK-ON Modules. RACK-UPs, STICK-ONs and Accessory Panels May Be Installed in Unlimited Combinations. Item is In Stock and should ship in 1-2 business days.	Our Price:$130.83 List Price: $175.00 You save 25%!
	Radio Design Labs RURA3A 19" Rack Adapter, multi The RU-RA3A permits the mounting of five STICK-ON modules together with three RACK-UP modules. If AMS accessories are mounted in the RACK-UP mounting spaces, then up to 10 STICK-ON modules may be secured to the RU-RA3A shelf. Item is In Stock and should ship in 1-2 business days.	Our Price:$59.15 List Price: $79.12 You save 25%!
	Radio Design Labs SMK-12 Mounting Strip for STICK-ON Units The SMK-12 allows removable surface (up to 6 units) or edge (typically 12, max. 16) mounting of STICK-ON units. They can be fastened to its surface using screws or adhesive foam pads. Item is expected to be available to ship in 2-3 weeks. Need it sooner? Call us!	Our Price:$25.98 List Price: $34.76 You save 25%!
	Radio Design Labs SR-10 Stick-On Mounting Rack for 10 Units The STR-10 Racking System holds up to 10 STICK-ON units. It holds STICK-ONs at an angle allowing for control adjustment from either the edge of a STICK-ON, or the top (depending on where the adjustment is located on the STICK-ON ... Item is In Stock and should ship in 1-2 business days.	Our Price:$60.95 List Price: $81.51 You save 25%!
	Radio Design Labs SR12A Stick-On Mounting Rack/Up to12 SR-12A chassis can be mounted in a rack or on a backboard to provide mounting of 12 STICK-ONs. Item is expected to be available to ship in 2-3 weeks. Need it sooner? Call us!	Our Price:$60.95 List Price: $81.51 You save 25%!
	Radio Design Labs SR4 Mounting Frame for Stick/TX The SR-4 is a universal module chassis that can mount to a backboard, wall or nearly any other support. It provides mounting for 4 STICK-ON power amplifiers or 7 standard STICK-ON modules. TX ™ modules may also be mounted. There is ... Item is expected to be available to ship in 2-3 weeks. Need it sooner? Call us!	Our Price:$78.86 List Price: $105.47 You save 25%!
	Radio Design Labs STR19A Rackmount System for 12 Stick-On Units The STR-19A Racking System holds up to 12 STICK-ONs in a 19 inch rack and only occupies two rack spaces. Item is expected to be available to ship in 2-3 weeks. Need it sooner? Call us!	Our Price:$118.76 List Price: $170.22 You save 30%!
	Radio Design Labs STR-19B Rackmount Kit for 10 Stick-On Units The STR-19B Racking System holds up to 10 STICK-ON unitss in a 19 inch rack and only occupies two rack spaces. The STR-19B holds STICK-ONs at an angle allowing for control adjustment from either the edge of a STICK-ON, or the top ... Item is expected to be available to ship in 2-3 weeks. Need it sooner? Call us!	Our Price:$141.20 List Price: $202.37 You save 30%!
	Radio Design Labs UC1 Utility Chassis, Single The UC-1 is an ULTRASTYLE design tabletop chassis for mounting RDL modules and accessories. The front panel features a single RACK-UP mounting bay. The rear panel has an identical mounting bay and is supplied with matching filler panels. ... Item is expected to be available to ship in 2-3 weeks. Need it sooner? Call us!	Our Price:$79.77 List Price: $106.69 You save 25%!
	Radio Design Labs DRA-35S Din Rail Adaptor for STICK-ON The DRA-35S is a 35 mm DIN rail mounting bracket that provides positive mounting for any RDL STICK-ON® module. The oblique mounting angle of the DRA-35S allows an installer to mount several STICK-ON modules to a single DIN rail. Access ... Item is In Stock and should ship in 1-2 business days.	Our Price:$15.92 List Price: $21.29 You save 25%!
	Radio Design Labs DTB-RDL Detachable Terminal Block Use DTB's to quickly detach and reattach wiring harness to STICK-ON units. Item is In Stock and should ship in 1-2 business days.	Our Price:$5.67 List Price: $7.58 You save 25%!