Radio Design Labs TX1W Music On Hold Amplifier - Power Supply Not Included

Radio Design Labs TX1W
Music On Hold Amplifier - Power Supply Not Included

View all Radio Design Labs products

Music On Hold Amplifier - Power Supply Not Included

Radio Design Labs TX1W

The TX-1W is part of the group of versatile TX series products from Radio Design Labs. The TX series feature the advanced circuitry for which RDL products are known, combined with durable, quality connectors. The ultra-compact TX series can be mounted in limited space using the adhesive methods popularized by RDL’s STICK-ON® Series. The TX-1W may be mounted directly to a backboard or chassis using a variety of mounting options available from Radio Design Labs.

The TX-1W is the ideal choice in on-site installations where the central telephone switching unit needs to be fed with music, voice or combined music/voice signals.

There is a wide variety of telephone instruments in use. When a caller is placed on hold, the audio quality perceived is affected by the caller's own telephone, as well as the telephone lines, central switch and on-site equipment. Due to these variations, conventional audio amplifiers used as music-on-hold drivers frequently produce annoying artifacts at the caller's earpiece. Attempts to reduce listener fatigue through high-frequency roll off alone tends to produce a muffled, tired sound.

The TX-1W features a spectral response specifically characterized to match the broadest variations in telephone audio distribution, producing a lively, crisp, interesting sound without the annoying resonances and distortions prone to creating listener fatigue. A single front-panel control is provided for audio level adjustment.

The TX-1W provides an unbalanced input via a conventional phono jack. Two audio outputs are provided. The unbalanced output can drive virtually any system input impedance. This output is intended to be connected to any phone system’s unbalanced, connectorized input. The TX-1W will deliver standard line-level signals for typical (-10 dBV) inputs, but is capable of delivering up to 1-watt RMS into 8 ohm inputs! For systems with a 600 ohm transformer input, the TX-1W provides a balanced output through the barrier block, suitable for direct connection of telephone-type wire.

For Music-on-Hold installations of any input impedance or audio configuration, the TX-1W is the universal choice. Use the TX-1W individually, or combine it with other RDL Rack-Up® or STICK-ON paging, automatic paging or audio processing modules as part of a complete audio/video system.

* The power supply needed for this item is the PS24A *

Features:

To Feed Audio into Telephone Equipment Music-on-HoldInput
Adjustable Audio Level
Optimized Sound Quality
Unbalanced Output up to 1 Watt
Balanced Transformer-driver Output
Ultra Compact Size

	Radio Design Labs PS24A Power Supply, 24 Vdc @ 400 mA 24 VDC power supply for use with Radio Design Labs audio equipment. Usually ships in 1-2 business days List Price: $27.48 Our Price $20.85 You save 24%! Usually ships in 1-2 business days
	Radio Design Labs MB1-RDL Mounting Kit for STICK-ON, TX, or Rack-Up module Two mounting brackets mounts a STICK-ON, TX, or Rack-Up module to a flat surface. Usually ships in 1-2 business days List Price: $3.62 Our Price $3.11 You save 14%! Usually ships in 1-2 business days
	Radio Design Labs MB2-RDL Mounting Kit for RU and TX Series MB-2 pair mounts a RACK-UP or TX module above or below a surface. Usually ships in 2-3 weeks List Price: $2.46 Our Price $2.11 You save 14%! Usually ships in 2-3 weeks Need it sooner? Call us!
	Radio Design Labs MB3-RDL Kit to Mount ST, TX Series Modules on FP Panel TX or STICK-ON Module fastens to MB-3 which slides into FP-RRA/H track. Usually ships in 2-3 weeks List Price: $6.08 Our Price $4.61 You save 24%! Usually ships in 2-3 weeks Need it sooner? Call us!
	Radio Design Labs SR4 Mounting Frame for Stick/TX The SR-4 is a universal module chassis that can mount to a backboard, wall or nearly any other support. It provides mounting for 4 STICK-ON power amplifiers or 7 standard STICK-ON modules. TX ™ modules may also be mounted. There is ample ... Usually ships in 2-3 weeks List Price: $100.88 Our Price $76.56 You save 24%! Usually ships in 2-3 weeks Need it sooner? Call us!
	Radio Design Labs UC1 Utility Chassis, Single The UC-1 is an ULTRASTYLE design tabletop chassis for mounting RDL modules and accessories. The front panel features a single RACK-UP mounting bay. The rear panel has an identical mounting bay and is supplied with matching filler panels. ... Usually ships in 2-3 weeks List Price: $102.05 Our Price $77.46 You save 24%! Usually ships in 2-3 weeks Need it sooner? Call us!
	Radio Design Labs DRA-35T Din Rail Adaptor for TX Module The DRA-35T provides mounting for any RDL® TX or MAX TX module to a DIN rail. The unique design allows mounting TX modules in a rack, cabinet or anywhere else DIN rail mounting of TX modules is desired. Usually ships in 2-3 weeks List Price: $9.97 Our Price $7.56 You save 24%! Usually ships in 2-3 weeks Need it sooner? Call us!
	Radio Design Labs PM-1T Pole Mount Tray for RDL Module The PM-1T is a tray that mounts above a projector using a standard (1.5" I.D.) round projector pole or any smaller round or rectangular pole. The tray accommodates up to two FP-PA20 Audio Power Amplifiers (for stereo operation) and two ... Usually ships in 2-3 weeks List Price: $97.41 Our Price $73.94 You save 24%! Usually ships in 2-3 weeks Need it sooner? Call us!
	Radio Design Labs PM-1V FP-PA20A and PS Pole Mnt Adptr The PM-1V vertically mounts any FLAT-PAK series module to a standard (1.5” I.D.) round projector pole or to any smaller round or rectangular pole. Usually ships in 2-3 weeks List Price: $38.32 Our Price $29.09 You save 24%! Usually ships in 2-3 weeks Need it sooner? Call us!
	Radio Design Labs PM20H Pole mount Adapter for FP-PA20 The RDL PM20H horizontal pole mount adapter is designed for the FP-PA20 and PS-24U2. It may also be used for STICK-ON or TX modules. Usually ships in 2-3 weeks List Price: $44.88 Our Price $34.07 You save 24%! Usually ships in 2-3 weeks Need it sooner? Call us!
	Radio Design Labs PM20V Pole mount Adapter for FPPA20 The PM-20V vertically mounts an FP-PA20 type amplifier module and a PS-24U2 to a standard (1.5” I.D.) round projector pole or to any smaller round or rectangular pole. STICK-ON and TX series modules may also be mounted. Extra cabling can ... Usually ships in 2-3 weeks List Price: $44.88 Our Price $34.07 You save 24%! Usually ships in 2-3 weeks Need it sooner? Call us!
	Radio Design Labs TXRA5 19" Rack Adapter for TX Series Usually ships in 2-3 weeks List Price: $39.33 Our Price $29.85 You save 24%! Usually ships in 2-3 weeks Need it sooner? Call us!