Studio Technologies MODEL-35
TALENT AMPLIFIER

MODEL-35

The Model 35 Talent Amplifier is a full-featured stereo headphone amplifier (cue) for use with the StudioComm 55/56 Stereo Monitoring System or StudioComm 74/75 Surround Monitoring System.

Model 35 modules are typically deployed in voice-over booths, studio areas, or other locations where voice or music talent needs access to a headphone cue feed. Using a standard 3-pin XLR-type audio cable, the Model 35 connects directly to, and is powered by, a StudioComm 55/56 or StudioComm 74/75 system. The Model 35 provides a stereo audio amplifier, built-in level control, stereo/mono switch, and support for one or two pairs of headphones. Up to four Model 35 Talent Amplifier modules can be used with a StudioComm 55/56 or StudioComm 74/75 system.

Specifications:

• Power Requirements: +20-32 Vdc (modulated with left channel audio), provided by Model 55 or Model 74 Central Controller
• Power Present LED: red, indicates presence of operating power
• Connectors:
  Input (from Model 55 or Model 74): 3-pin XLR-type, female
  Loop Thru: 3-pin XLR-type, male, connected in parallel with input connector
  Headphone Outputs: 2, ¼ -inch, 3-conductor (stereo) phone jacks
• Headphone Output: 1, feeds two headphone jacks
• Load: intended for connection to one or two pairs of headphones with total impedance of 75 ohms or greater
• Output Level: user adjustable
• Maximum Output Voltage: 16 V peak-to-peak into 150 ohms @ 1% THD+Noise, 400 Hz
• Distortion (THD+N): 0.03%
• Frequency Response: 20 Hz-20 kHz ±0.5 dB
• Dimensions (Overall):
  4.2 inches wide (10.7 cm)
  2.0 inches high (5.1 cm)
  5.3 inches deep (13.5 cm)
• Mounting: desktop; microphone stand mounting adapter included
• Weight: 0.8 pounds (0.4 kg)
  

Our Part #  MODEL-35