Bag End TA5000-I
Time-Align Loudspeaker, Painted Installation Finish

TA5000-I

The TA5000-I is a permanent installation full range loudspeaker system offering both high fidelity and high efficiency. The Time-Aligned™ studio quality sound provides detail and clarity not found in other designs. Rugged birch plywood finished with our beautiful utility black textured lacquer and a black steel grille will fit nicely into almost any application. Optional flying attachment points allow for safe and convenient rigging.

Applications

• Auditorium Sound Reinforcement
• Church Sound Reinforcement
• Nightclub Applications
• DJ System Installation

Specifications

• Enclosure: 18 mm 13-ply birch plywood
• Low Frequency Transducer: 15" Cone, 2.5" Voice coil, 80 oz. Magnet
• High Frequency Transducer: 1" Exit compression driver, 1.25" Titanium diaphragm, 24 oz. Magnet, Exponential horn
• Input Connectors: Cinch 142 screw terminal barrier strip
• Grille: 16 Gauge black vinyl coated perforated steel
• Optional Hardware: Rigging points
• System type: 2-way vented - 3.4 cu. ft.
• Impedance: 8 Ohms
• Crossover Network: Passive Time-Align equalizer type at 1.7 kHz
• Time Offset Between Drivers: < +/- 25 Microseconds
• Frequency Response: 50 Hz to 19 kHz +/- 3 dB (4 pi Steradians)
• Sensitivity: 101 dB SPL (1W @ 1m)
• Dispersion: 90 degrees Horizontal (-6 dB), 40 degrees Vertical (-6 dB)
• Power Handling: 200 W continuous sine wave, 800 W instantaneous peak
• Finish: Black textured lacquer
• Dimensions: 27"h x 22"w x 18"d, Trapezoidal, 8 degree taper per side
• Weight: 75 lbs.
• Shipping Dimensions: 21" x 30" x 25"
• Shipping Weight: 83 lbs.

Our Part #  TA5000-I