Shure WL93-6T
Subminiature Condenser Lavalier Microphone, Tan (black shown), with 6 foot cable.

WL93-6T

Model WL93 Microphones are economical omnidirectional, subminiature, lavalier, condenser microphones designed for general speech applications where a visually unobtrusive microphone is desirable. All WL93 models are supplied with a mounting block with attached tie bar, a sew-on mounting bracket, and an acoustic windscreen to minimize wind noise in outdoor applications.

All WL93 models include a cable terminated with a 4-pin mini connector which connects directly to a Shure wireless body-pack transmitter.

Features

• Subminiature lavalier design; ideal size for theater, television broadcasting, video, film, and sound reinforcement
• Small, inconspicuous mounting hardware
• Full, clear sound comparable to larger microphones
• Smooth extended frequency response with presence rise specially tailored for chest-worn microphone operation
• Controlled low-frequency rolloff reduces low-frequency clothing and room noise
• Low distortion, wide dynamic range
• Uniform omnidirectional polar pattern

Specifications

• Type: Condenser (electret bias)
• Frequency Response: 50 to 20,000 Hz
• Polar Pattern: Omnidirectional, uniform with frequency
• Output Impedance: 3000 ohms
• Output Level: Open Circuit Voltage: -38 dBV/Pa (13 mV)
• Output Clipping Level (at 1,000 Hz): 0.25 V at 120 dB
• Total Harmonic Distortion: less than 1% at 120 dB
• Maximum SPL: 120 dB
• Dynamic Range (maximum SPL to A-weighted noise level): 102 dB
• Output Noise (equivalent to SPL: 18 dB typical, A-weighted
• Signal-to-Noise Ratio: 76 dB at 94 dB SPL (IEC 651)
• Polarity: Positive pressure on microphone diaphragm produces positive voltage on pins 3 and 4 with respect to pin 1 (ground)
• Recommended Operating Voltage: 2 to 10 V; 5 V nominal (pin 2 to pins 3 and 4)
• Current Drain: 40 uA typical
• Environmental Conditions
  • Operating Temperatures: -18° to 57° C (0° to 135° F)
  • Storage Temperatures: -29° to 74° C (-20° to 165° F)
• Cable: Tan, 6 ft, attached, two-conductor, shielded, terminated by miniature connector type TA4F
• Case: Tan ABS thermoplastic case with stainless-steel-mesh grille
• Net Weight: 16 g (0.57 oz)

Our Part #  WL93-6T