Radio Design Labs FP-AVDA4
Audio/Video Distribution Amplifier

FP-AVDA4

The FP-AVDA4 is the perfect choice in applications where consumer format audio and video signals need to be distributed simultaneously. Audio and video inputs and outputs are made on the top panel phono jacks. The FP-AVDA4 has a single 75 O input phono jack for the video signal and two phono jacks for the left and right audio inputs. Four source-terminated, 75 O video outputs are provided on the video output phono jacks. Four stereo audio outputs are provided on phono jack pairs located adjacent to the corresponding video output. Unused outputs need not be terminated. Audio and video outputs are at unity gain.

Features:

• Consumer Audio/Video Distribution
• Four Outputs (Video + Stereo Audio)
• Professional Quality Performance
• 75 O Video Input/Outputs
• Unbalanced Audio Input/Outputs
• Wideband Video – Flat to 10 MHz
• Ultra-Compact All Metal Construction

Specifications:

VIDEO

• Input:
  Phono jack, 1 V p-p
• Input Impedance:
  75 O
• Gain:
  Unity
• Outputs (4):
  Phono jack
• Output Level:
  1 V p-p (into 75 O)
• Frequency Response:
  10 Hz to 10 MHz (+/- 0.2 dB)
• Noise:
  < -75 dB (below 1 V p-p)
• Output Isolation:
  > 45 dB
• Differential Gain:
  0.1%
• Differential Phase:
  0.1 degree (measured at 10% and 90% APL)

AUDIO

• Inputs (2):
  Phono jacks (stereo), -10 dBV Unbalanced
• Input Impedance:
  10 kO, bridging
• Gain:
  Unity
• Outputs (8):
  Phono jacks (4 stereo)
• Output Impedance:
  150 O drives 10 kO lines
• Frequency Response:
  20 Hz to 40 kHz (+/- 0.25 dB)
• THD+N:
  < 0.05%; typ. 0.01% (1 kHz)
• IMD:
  < 0.02%
• Output Level:
  -10 dBV
• Headroom:
  > 18 dB
• Noise:
  < -85 dB below –10 dBV
• Crosstalk:
  Better than 75 dB (20 Hz to 20 kHz);
  typ < -90 dB (1 kHz)
• Power Requirement:
  GROUND-REFERENCED, 24 Vdc @ 60 mA
• Dimensions:
  Height: 1.20 in. 3.05 cm
  Width: 3.25 in. 8.26 cm
  Length: 6.41 in. 16.28 cm

Our Part #  FP-AVDA4