Rolls RA200
100 W RMS/Channel @ 4 Ohms Power Amplifier

The RA200 features two 100 watt RMS - 4 ohm outputs, a bridging switch, MOSFET drivers in a voltage and current gain circuit, one second power-up delay, and LED power output meters. The unit is housed in a painted steel chassis and includes a special high performance transformer, and a fused power line. The MOSFET output stage is fault protected which allows the RA200 to forgive momentary output shorts, and has over-temperature protection. CAUTION: The RA200 is convection cooled. Adequate ventilation room for the heat sink fins on the rear panel must be provided.

Features:

• MOSFET drivers in a voltage and current gain circuit
• 1 second turn-on delay
• LED power output meters
• Fault protected outputs

Specifications:

• Power Output, Stereo:
     * 100 Watts RMS/ch. 4 ohms
     * 70 Watts RMS/ch. 8 ohms
• Bridged: 200 Watts RMS 8 ohms
• Input Connectors: 1/4" TRS balanced and RCA
• Output Connectors: 1/4" and 5-way binding posts
• Sensitivity: <1 VRMS for full output
• THD: <.08% (1kHz @ 1 Watt)
• S/N Ratio: 106 dBU
• Power Bandwidth: DC - 30 kHz +/- 1dB
• Damping Factor: > 150
• Slew Rate: 100 Volts/microSecond
• Phase Shift: <10 Deg., 20Hz - 20kHz
• Input Impedance: 10 K ohms Balanced
• Power: 120 VAC 60Hz 2.5A, 230 VAC 50Hz
• Dimensions: 19" x 3.5" x 7.5" (48 x 9 x 19 cm)
• Weight: 12 lbs (5.5 kg)