Rolls RA170
Power Amp, 70V/70W

RA170

The RA170 Power Amplifier was designed especially for the installation contractor. The RA170 is a single rack-space, mono unit with a choice of an RCA or 1/4" unbalanced input. The 70 volt speaker outputs are provided via spring-loaded terminals - no transformer is required for speaker connection. The front panel includes a Power indicator LED, a Volume control, and two Clip LEDs which indicate circuitry overload. The output circuitry is protected from momentary shorting and excessive load by a specially designed protective circuit.

Features:

• Balanced 70 volt line output
• Drives 70 volt speakers directly
• RCA or 1/4" inputs
• Spring-loaded output
• Clip indication
• Fault protected output

Specifications:

• Recommended Load: 70 volt line (70 watts maximum)
• Frequency Response: 70Hz to 20kHz
• Equiv. Input Noise: 100 µV typical, A weighted, 600 ohm input
• S/N Ratio: 114 dB @ 70 Watts
• Gain: 40 dB
• Input Impedance: 47k ohms
• Size (W x H x D): 19" x 1.75" x 5"
• Weight: 5.5 lbs.

Our Part #  RA170