Audix VX-10
Handheld Vocal Condenser Microphone

VX-10

The VX-10 is a true condenser microphone designed to set new performance standards in the areas of live sound and broadcast applications.

With a smooth uniform response over a frequency range of 40-20k Hz, the VX-10 is highly sensitive to transient response and will reproduce vocals and speech with exceptional detail and realism. The VX-10 will handle close miking with minimal proximity effect and will not lose signal if the user is slightly off-axis from the front of the microphone. A cardioid pattern provides excellent gain before feedback and, even with it's extended low end response, the VX-10 offers sonic clarity without "boominess" in the lower mids - usually difficult to attain with live vocals.

The VX-10 operates on phantom power of 48-52 volts and will achieve optimum results with a high quality mic preamp. Low noise electronic circuitry, low impedance, and balanced output allow interference-free performance even with long cable runs.

Applications:

• Lead vocals
• Background vocals
• Speech
• Live performance and live broadcasts
• Excellent for use with in-ear monitors
• On air announce microphone
• Studio vocals
• Acoustic instruments (flute, strings, guitar, piano)

Specifications:

• Transducer Type: Condenser
• Frequency Response: 40 Hz - 20 kHz
• Polar Pattern: Cardioid
• Output Impedance: 250 Ohms
• Open Circuit Sensitivity: 23 mV (ref 1k @ 1 Pascal)
• Equivalent Noise Level: 19 dB (A weighted)
• Signal to Noise Ratio: 73 dB (ref 1k @ 1 Pascal)
• Power Requirements: 48 - 52v phantom
• Maximum SPL: 138 dB
• Cable/Connector: 3-pin gold plated male XLR connector
• Polarity: Positive voltage on pin 2 relative to pin 3 of output XLR connector
• Housing: Die cast zinc body with brass capsule housing
• Weight: 11.24 oz. (318.6 g)
• Finish: Black E-coat

Our Part #  VX10