Audix SCX25-A
Large Diaphragm Condenser Microphone, Cardioid, Shock-Mounted Capsule, Low Profile Body

SCX25-A

The SCX-25 is a true condenser microphone with an elegant design and a patented capsule suspension system. Uniquely shock mounted within an intricate machined brass ring, the SCX25 capsule is completely isolated from the mic body and the electronics. By successfully minimizing acoustic reflections and diffractions, SCX-25 delivers a pure, open-air sound unlike any other microphone.

Delivering a smooth uniform frequency response from 20 Hz–20 kHz, the SCX25 will reproduce vocals and acoustic instruments with exceptional detail and realism. The SCX-25 is very consistent when responding to incoming off-axis signals, exhibiting excellent phase coherence and minimal proximity effect.

By employing miniaturized low noise components, the preamp circuitry for the SCX-25 is housed within a brass microphone body which is merely 4 inches long. The result is the smallest footprint of any large diaphragm microphone to date, allowing the SCX-25 more convenience and freedom when it comes to mic placement. And because of the internal capsule suspension mounting system, the need for costly shock mounts is eliminated and set-up time is greatly simplified.

The SCX-25 operates on phantom power of 48–52 Volts. Optimum results will be achieved by using the SCX-25 with a high quality mic preamplifier and premium quality microphone cable.

Specifications

• Transducer Type: Condenser
• Frequency Response: 20Hz-20kHz
• Polar Pattern: Cardioid
• Output Impedance: 200 ohms
• Sensitivity: 27 mV (ref 1k @ 1 Pascal)
• Equivalent Noise Level: 14 dB (A weighted)
• Signal to Noise Ratio: 80 dB (ref 1k @ 1 Pascal)
• Power Requirements: 48-52V phantom
• Maximum SPL: 135 dB
• Dynamic Range: 121 dB
• Cable/Connector: 3 pin gold plated male XLR connector
• Polarity: Positive voltage on pin 2 relative to pin 3of output XLR connector
• Housing: Brass
• Weight: 6 oz

Our Part #  SCX25-A