Blue Sky SUB12
Subwoofer, Powered, 12"

SUB12

General Specifications - SUB 12

• All subwoofer measurements are measured using the subwoofer direct input, which does not have a low pass filter.
• Voltage Sensitivity: 90dB SPL @ 100mv @ 1M (40 to 80Hz bandwidth limited)
• Frequency Response (anechoic): 30 to 200Hz +/-3dB
• Typical In-Room Response: 20 to 200Hz (3000 Cubic Feet)

Bass Management Section

• Input Impedance: 20k Ohms balanced
• Common Mode Rejection Ratio: 40dB typical @60Hz
• Maximum Input Level (all inputs): +24dBu balanced
• Maximum Output Level: +24dBu balanced
• Output Impedance: 200 Ohms balanced
• Auto Mute Time Out: >15 Minutes
• Mute Threshold (all inputs): 30mV

Left & Right Inputs to Sat Outputs

• Gain (balanced in and out): 0dB
• High-Pass Filter type: 2nd order Linkwitz-Riley
• High-Pass Filter Cutoff: 80Hz
• High-pass Filter Q: 0.707
• THD + Noise: 0.002% @ 1kHz @ +4dBu

Left & Right Inputs to SUB Out

• Gain: 0dB
• Low-Pass Filter Type: 4th order Linkwitz-Riley
• Low-Pass Cutoff: 80Hz
• Subwoofer Direct In to Direct Output: Gain: 0dB; Low-Pass Filter: None

Enclosure

• Solid 3/4" MDF construction with 1" MDF Front and Rear Baffle
• Viscoelastic energy absorbing front baffle coating
• Flush mounted driver
• Isolation feet are included. Inserts for optional attachment of spike feet.
• Dimensions are 18" H x 16" W x 20" D (22.07" with heatsink and grill)
• Weight 62lbs.

12" Woofer

• Long excursion design with cast aluminum frame.
• 2" voice coil with vented motor for high power handling
• Fully video shielded
• Subwoofer Amplifier
• Discrete symmetrical bipolar design with localized feedback
• 200-W RMS into 4 Ohms
• THD + Noise less than 0.015% at rated power @100Hz
• Adjustable gain control
• Measurement Data (Click to view response graph)

Our Part #  SUB12