Blue Sky SAT6.5
Speaker, Powered, Satellite Monitor 6.5"

SAT6.5

General Specifications - SAT 6.5

• Input Impedance: 40k Ohms balanced
• Common Mode Rejection Ratio: 40dB typical 60Hz
• Voltage Sensitivity: 200mV = 90dB SPL @ 1M
• Maximum Input Level: +24dBu balanced
• Frequency Response: +/- 1.5dB 200 to 10kHz; +/- 3.0dB 80 to 20kHz
• Low Frequency Cutoff: 80Hz
• Low Frequency Rolloff: 12dB per octave
• System Q: 0.707
• System Crossover Frequency: 1.5kHz
• System Crossover Slope: 4th order Linkwitz-Riley Acoustic

Enclosure

• Solid 3/4" MDF construction with 1" front and rear baffle"
• Viscoelastic energy absorbing front baffle coating
• 1/4"x 20 inserts for attachment of OmniMount type 60 brackets (formerlyknown as the 100 Series).
• Dimensions are 12" H x 8" W x 10 1/4" D (11.88" with heatsink and tweeterwave guide)
• Weight 27lbs

6 1/2" Hemispherical Woofer

• Long excursion design with a cast aluminum frame
• 1 1/2" aluminum voice coil with vented motor for high power handling
• Copper shorting ring for lower distortion.
• Ultra-Low power compression
• Mica filled polypropylene cone and rubber surround
• Fully video shielded

1" Tweeter

• Dual concentric diaphragm with integral wave guide
• High power handling neodymium motor structure
• Fully video shielded
• SUB 1Khz primary resonance

Satellite Amplifier

• Discrete symmetrical bipolar design with localized feedback
• 100-Watts RMS into 4-Ohms for the woofer
• 100-Watts RMS into 4-Ohms for the tweeter
• THD + Noise less than 0.015% at rated output @1kHz
• XLR balanced input
• Adjustable gain control.
• Computer optimized crossover

Our Part #  SAT6.5