FSR, Inc CDA-2
Computer Video Distribution Amplifier

CDA-2

The CDA-2 is a computer video distribution amplifier. It takes the input signal from the video card of a computer and splits it to be used by a projector and a monitor. This unit not only splits the signal it also buffers it to ensure absolute signal integrity at the receiving device (projector or monitor). With 300 MHz of bandwidth, the CDA-2 can drive any VGA, Super VGA, XGA or XGA-2 computer video signal up to 50 feet using high resolution cable (for longer runs up to 175 feet use the CDA-2EQA).

Features:

• Compatible with LCD panels, projectors and monitors
• Two outputs
• Metal case provides superior shielding
• HD 15-pin 5 ft. male-to-male monitor cable included
• 300 MHz video bandwidth
• Drive outputs approximately 50 feet
• Individually buffered outputs
• UL and CSA approved external power supply (wall plug-in)
• ID bits passed through to output one (permits monitor to determine video resolution)
• Locking power connector

Specifications:

• Video Inputs:
     * Number/type: 1 RGB + Sync
     * Connectors: 15 pin HD female
     * Level (nominal): Analog 0.7V p-p
     * Level (maximum): 2V p-p
     * Impedance: 75 ohms
     * Horizontal Frequency: 15 kHz - 200 kHz
     * Vertical Frequency: 30 Hz - 150 Hz
• Video Output:
     * Number/type/connector: 2 RGB + Sync/HD-15 male connector
     * Level (nominal): Unity
     * Impedance: 75 ohms
• Sync:
     * Input/output type: Sync On Green, Composite Sync, Separate Sync (same as input)
     * Input level: 3.0V to 5.0V p-p
     * Output level: TTL to 5.0V p-p
     * Input Impedance: 510 ohms
     * Output impedance: 75 ohms
     * Propagation delay (max): 58 nS
     * Rise/fall time (max): 2 nS
     * Polarity: Positive or negative
• Bandwidth: >300kHz supporting up to 2048 x 1536 @ 60Hz) QXGA
• Max Cable Length: Approximately 50’
• Power AC input: 115VAC, 50/60 Hz, 20 Watts
• Mounting: Table top
• Enclosure Type: Metal
• Dimensions: 3.6" x 2.6" x 1"
• Weight: 14 oz.

Our Part #  CDA-2