Electro-Voice EVID C8.2
8" Coaxial Speakers (pair)

EVID C8.2

Either 70V/100V or 8 ohm operation is standard on every model, and they are also acoustically matched to the EVID surface mount speaker line. The EVID Ceiling Speaker line will solve any installation challenge, plus all installation accessories commonly needed for most jobs are included.

Never before has a ceiling speaker system delivered such a full range punch. Its specially tuned enclosure and 8" woofer provide amazing bass response. The 1" waveguide coupled tweeter give smooth controlled coverage out to 20 kHz. Perfect for installations where a flush mount design is desired but demand for high quality audio exists. Features a 4-point mounting system which makes installations fast and easy. Comes complete with mounting support ring and tile rails. No additional accessories needed for most installations. The model C8.2LP is identical to the C8.2 but in a low profile backcan for tight installation spaces.

• 8" coaxial two-way with extended LF
• Waveguide coupled Ti Tweeter
• Full bandwidth overload protection
• Front baffle wattage tap adjustment
• Integrated low loss matching transformer allows for either 70v/100v or 8-ohm operation
• Includes tile bridge and mounting ring for easy installation
• Integrated ported enclosure for extended bass response

• Freq. Response (-10dB): 50Hz-20kHz
• Coverage (Conical): 110 degrees
• Power Handling: 100W Cont./400W Peak
• Sensitivity (SPL 1w/1m): 91 dB
• Max Calculated SPL: 117 dB
• Impedance: 8 Ohms nominal (transformer bypass)
• Network: Network and transducers protected, 12 dB/oct 2.6kHz
• LF Transducer: 8in. (200mm) Polypropylene cone
• HF Transducer: 1in. (25mm) Ti Mylar laminate
• Transformer Taps:
  • 70V: 1.88, 3.75, 7.5, 15 or 30W
  • 100V: 3.75, 7.5, 15 or 30W
  • Bypass: 8 Ohms
• Connectors: Phoenix type removable, with screw terminals and "loop-thru", accepts 12 ga wire
• Enclosure Material:
  • Baffle-UL 94V-O rated ABS
  • Backcan-Zinc plated steel
• Grille: Perforated powder coated steel with safety tether
• Support Hardware: Tile bridge, backing plate support, cutout template, paint shield
• Dim. (H x Dia.): 10.0" x 10.6" (255mm x 270mm)
• Cutout Size: 10.8" (274mm)
• Net Weight (each): 11.0 lbs (5.0 kg)
• Shipping Weight (pair): 24.0 lbs (11.0 kg)

Our Part #  C8.2