JK Audio RMC
Portable Remote Mixer

RMC

The RemoteMix C+ is a combined audio mixer, headphone amplifier and telephone hybrid in one. It’s perfect for remote broadcasts, sporting events, and field reporting from any location.

Simply plug the RemoteMix C+ into an analog phone line, connect a couple of microphones and headphones, and you’re ready to call into the station. Switch the "Phone Line" switch to "Dial/Talk" and you will hear a dial tone. Now dial using the RemoteMix C+ keypad. In your headphones, you will hear a mix of both microphones and the line in jack, as well as the audio coming back from the other side of the phone call. This headphone mix also comes out of the back of the unit on an RCA jack and on an XLR balanced jack, which are adjustable from line level to mic level for PA system or tape deck feeds. The built-in time-delayed peak limiter helps to control transmit levels.

You can also connect the RemoteMix C+ to a cellular telephone equipped with a fax/modem interface, which converts your cell phone into the equivalent of a standard RJ-11 phone jack. Just connect the interface between the RemoteMix C+ phone line jack and your cell phone and you are ready to go wireless. Contact your cell phone dealer for fax/modem interface availability.

• Two XLR Microphone Inputs with independent level controls. Mic 1 input is mic/line switchable.
• Two 1/4" Headphone Jacks adjustable with "Headphones" control.
• RCA Line Input accepts line level signals. Adjustable with the "Line In" control.
• RCA Line Output delivers a line level signal containing the phone + mic mix. Adjustable to mic level with the "Line Out" control.
• Balanced XLR Output delivers a line level signal containing the phone + mic mix. Adjustable to mic level with the "Line Out" control.
• RJ-11 Jack for use with conventional phone lines. Also has an auxiliary handset input for use as a standard telephone. Handset jack is biased for electret microphone types.
• Time Delayed Peak Limiter and VU Meter help to control transmit levels. The peak limiter has a three second delay before clipping and audio. This allows for normal speech patterns as well as brief exclamations to be broadcast unhindered.
• Two 9 Volt Batteries will power the unit for 36 hours. The batteries are installed parallel so the unit can run on only one battery if necessary. An AC adapter is also included with the unit.
• DTMF/Pulse Keypad for dialing out. Tone/Pulse switch located under the battery door.

• Inputs:
• Microphone: Female XLR (2), 1k ohms, -10 mV RMS (-35 dBm nom.) Mic 1 has a Mic / Line pad switch, Line = +5 dBm nominal
• Line in: RCA 20k ohms, 250 mV RMS (-10 dBm nom.)
• Outputs:
• Line out: RCA 50 ohms, 250 mV RMS (+5 dBm max.)
• Balanced out: Male XLR, 200 ohms, 500 mV RMS (+12 dBm Max.)
• Headphones: 1/4" Stereo (2), 8 ohms, 1/2 watt per channel
• Phone line: RJ11C, Isolation 1500 VAC
• Ringer: 1.2B REN
• Keypad:
• DTMF (Dual Tone Multi Frequency) / Pulse dial
• Switch located under battery door. Auxiliary Handset Jack, biased for electret microphone type handset.
• Size: 6.5" x 4.6" x 2.2" (16.5 x 11.7 x 5.6 cm)
• Weight: 1.8 Pounds

Our Part #  RMC