Crown CTS1200

Building on the foundation of the Com-Tech Series, Crown's CTs Series offers new flexibility and value for installed sound applications. The Com-Tech Series were the first to offer independent selection of high- and low-impedance operation for a specific channel, and CTs Series amplifiers continue that tradition, with power levels and features carefully chosen to perfectly integrate into fixed install design requirements.

CTS1200 Features

• High power density in a 2RU chassis
• Crown Switching Power Supply for lighter weight
• Selectable "Constant-Voltage" or low-impedance (4/8 ohm) operation perchannel
• 100V direct outputs
• Legendary Crown class-I (BCA) and AB+B output topologies offer the best inamplifier reliability
• Comprehensive array of indicators provide accurate diagnostics
• Fully PIP2-compatible
• HiQnet compatible

Power Output

• Dual mode, 2 ohms: 250W
• Dual mode, 4 or 8 ohms: 600W
• Dual mode, 16 ohms: 300W
• Dual mode, 70V: 600W
• Bridge mode, 4 ohms: 500W
• Bridge mode, 8 or 16 ohms or 140V: 1200W

Specifications

• Frequency Response (at 1 watt, 20Hz-20kHz): +/- 0.25dB
• Signal to Noise Ratio below rated power (20Hz to 20kHz): 105dB A-weighted
• Total Harmonic Distortion (THD) at full rated power, from 20Hz to 20kHz:<0.35%
• Damping Factor: 10Hz to 100Hz: >3000
• Crosstalk (below rated power, 20Hz to 1kHz): >80 dB
• Common Mode Rejection (CMR, 20Hz to 1kHz): 50 dB
• DC Output Offset: <2mV
• Input Impedance (nominal): 10 kilohms balanced, 5 kilohms unbalanced
• Maximum Input Level: +20dBu before input compression, +32dBu absolutemaximum
• Load Impedance (safe with all types of loads): Stereo: 2/4/8/16 ohms, 70V,100V. Bridge Mono: 4/8/16 ohms, 140V, 200V
• Voltage Gain (at maximum level setting): 8/4 ohm operation, 1.4Vsensitivity: 63.9:1 (36dB)
• Cooling: Continuously variable speed forced air, front-to-back airflow
• Dimensions (W x H x D): 19" x 3.5" x 14.25"
• Weight: 23.4 lbs (net); 28.3 lbs (shipping)

TMGR# CTS1200