Bogen Communications V35
Mixer / Amplifier, 35W

V35

Bogen's Power Vector modular amplifiers offer a wide range of power from which to choose from, with five models ranging from 35W to 250W. The amplifiers are designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems.

Each model includes eight module bays for plug-in input modules and allows up to four levels of priority between modules. Two module bays are capable of accepting signal processing plug-in output modules. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status.An11-segment LED output meter monitors output signal level.

Each model includes a motorized master volume control that can be controlled using a remote volume control panel (RVCP, sold separately).

Features:

• 5 models ranging from 35W to 250W with a large powerreserve
• Capable of handling 70V, 25V, 8-ohm, and 4-ohmspeaker loads
• 8 module bays
• Wide selection of advanced plug-in modules
• 2 module bays capable of handling signal processingplug-in output modules
• 4 levels of priority between modules
• 11-segment LED output level meter monitors the outputlevel of the power amplifier with Peak and Average meter switch
• Motorized master volume control that can be remotelyoperated
• Bass and treble controls
• Two-color LED for each channel indicates inputactive/clipping
• Lockable switch permits user to select eithertransformer- coupled outputs or a direct low-impedance output
• 5-position barrier strip, with clamping washers,provides connections for speaker loads
• Master mute function overrides all audio from themixer section of the amplifier
• Screw terminal for master mute and remote volumecontrol functions
• Each of the 8 module bays has an associatedindependent volume control
• Bass and treble control bypass switch (located inmodule bay 6)
• 125 Hz Lo-cut feature (switch located in module bay6)
• Signal processing insert jacks allow externalequipment to be inserted between the pre-amp output and the power amp input
• Pre-EQ unbalanced buffer output signal “post” allunit controls, but “pre” any external signal processing equipment connected
• Grounded, unswitched AC convenience receptacle with a500W maximum capacity provided for external equipment
• Remote volume control panel (RVCP) (sold separately)
• Security cover to protect volume, bass, and treblecontrols (PVSC) (sold separately)
• Rack mountable (rack mounting kit RPK87 soldseparately)
• 2 rack spaces high (3-1/2")

Specifications:

• Power Output (RMS):
      * Rated:35W
      * Typical @ 1 kHz: 45W
• Frequency Response:
      * Transformer: 45-20 kHz; 0/-2dB
      * Direct: 20-20 kHz; 0/-1 dB
• Distortion:
      * Transformer:0.5%
      * Direct: 0.1% (.05 typical @ 1 kHz)
• Signal-to-Noise:
      * Fundamental: -94dB
      * With Aux Module: -70 dB
      *With Mic Module: -60 dB
      * With Tel Module: -70 dB
• Tone Controls:
      * Bass Frequency: 100 Hz (+/- 10 dBminimum)
      * Treble Frequency: 10 kHz (+/- 10 dBminimum)
      * Low Cut Frequency: 125 Hz @ -6 dB/octave
• Sensitivity: 0.4V (at module bay connector)
• Output Regulation: 2 dB or better, no load to full load
• Output Impedance:
      * Transformer-Coupled: 70V, 25V, 8ohms (bal or unbal)
      * Direct Coupled: 4 ohms
• Inserts:
      * Insert "OUT" Level: 1VRMS(@FRP)
      * Insert "OUT" Impedance: 50 ohmsmaximum
      * Insert "IN" Sensitivity:1VRMS
      * Insert "IN" Impedance: 10k ohms minimum
• Pre-EQ Output:
      * Output Level: 4VRMS(@FRP)
      * Output Impedance: 50 ohms maximum
• AC Power Receptacle: 500 watts maximum power, unswitched
• AC Voltage: 120V AC, 60Hz
• AC Current: 0.6A
• Dimensions (W x H x D): 16-1/2" x 3-1/2" x 12"
• Weight: 24 lbs.

Our Part #  V35