Blue Sky ProDesk 5.1 System

System Includes:

• 5 x SAT-5 Active Satellite Speakers
• 1 x SUB-8 Subwoofer
• 1 x Bass Management Controller

ProDesk™ is the first truly full-range monitoring system specifically designed for critical mixing and monitoring on the desktop. ProDesk™ brings the desktop user the same spectral performance as Sky System One, with the only compromise being less output than its bigger brother. ProDesk™ uses the same revolutionary design technologies that were used in Sky System One. Ultra low distortion, proprietary woofers, superlative Danish tweeters and highly optimized amplifiers specifically designed for this application.

SAT-5 Active Satellite Speaker

• Enclosure: Solid 3/4" MDF construction with 1" front andrear baffle 1/4"x 20 inserts for attachment of OmniMount type 30 brackets(formerly known as the 75 series)
• Dimensions (H x W x D): 10.88” x 6.62” x 10.23” (11.88”w/ heatsink and tweeter wave guide)
• Weight: 24 lbs / 11 kg

.75” Tweeter

• Dual concentric diaphragm with integral wave guide
• High power ferrite magnet assembly
• Fully video shielded

5.25” Hemispherical Woofer

• Cast aluminum frame
• 1.5” voice coil
• Copper shorting ring
• Aluminum alloy cone
• Fully video shielded
• Vented motor structure

Satellite Amplifier

• Dual 60 Watts into 4-Ohm
• .01% THD + noise at rated power @ 1 kHz
• XLR balanced input
• Adjustable gain control
• B00® optimized crossover
• 80Hz filter bypass switch

General Specifications

• Input Impedance: 40k Ohms balanced
• Common Mode Rejection Ratio: 40dB typical 60Hz
• Voltage Sensitivity: 200mV = 90dB SPL @ 1M
• Maximum Input Level: +24dBu balanced
• Frequency Response: +/- 1.5dB 200 to 10kHz; +/- 3.0dB 80to 20kHz
• Low Frequency Cutoff: 80Hz
• Internal High Pass Filter: 80Hz 2nd order (selectable)
• Internal Crossover: 1.8kHz

SUB-8 Subwoofer

• Enclosure: .75” MDF with 1” front and rear baffle
• Isolation feet included
• Dimensions (H x W x D): 13” x 16” x 13.37” (15.76” w/heatsink and grill)
• Weight: 48.5lbs / 22kg

8” Hemispherical Woofer

• 8-inch high excursion woofer
• Vented motor structure
• Cast aluminum frame
• 2.0" voice coil
• Aluminum alloy cone

Amplifier

• Discrete symmetrical bipolar design
• 100 Watts RMS into 4-Ohm
• .01% THD + noise at rated power @ 100 Hz
• XLR balanced input
• Adjustable gain control
• B00® optimized crossover
• Voltage Sensitivity: 100mv=90dB SPL @ 1m
• Frequency Response (direct IN-anechoic): 35 to 200Hz
• Typical in room response (direct IN ): 20 to 200Hz (1500cubic feet)

Bass-Management

• Input impedance: 20K balanced
• Common mode rejection: 40dB typical @ 60Hz
• Maximum Input Level: +24dBu balanced
• Output Impedance: 200 Ohms balanced
• Nominal gain: 0dB
• High Pass filter: None (built into SAT 5)
• Low Pass filter: 80Hz 4th order
• Direct In low pass filter: None