Lowel Light Mfg P2-10
Multi-Use Tungsten Halogen Light

Halogen low voltage BI-PIN, JC series. 100 watts, 3300K.

Code: iP-49When used with #2 Reflector, becomes a non-focusing high intensity spot.  

Code: iP-20Weight: 7 oz (195 g)Barndoor Frame with two expandable rectangular leaves, two expandable triangular leaves. Accepts swing-in accessories. Rotates 360°. 

Code: iP-25Weight: 4 oz (113 g)Barndoor Frame with two removable Non-expandable Clip-on Leaves (iP-24). Frame accepts swing-in accessories and additional leaves. Rotates 360°. 

Code: iP-21Weight: 2 oz (57 g)Barndoor Frame only, accepts swing-in accessories, and/or leaves. Rotates 360°.  

Code: iP-22Weight: 1 oz (28 g)Changes from small to large rectangle as needed, and can be attached to, or removed from Barndoor Frame.  

Gel-jawz (8)Code: CL-15Weight: 2 oz (56 g)Package of eight clips. Attach to barndoor leaves to hold gels.

Code: iP-30Weight: 1 oz (28 g)Accessories can be changed in holders. However, for fast or frequent changes, each should have its own holder. Up to three holders attach to the Pro and i-light Barndoor Frame, for use one-at-a-time.  

Pro & i Gel FrameCode: iP-40Weight: 2 oz (56 g)Size: For 5 x 6" (12.7 x 15.2 cm) gelsFolded: 6 x 1 x 1" (15.3 x 2.5 x 2.5 cm)Locks directly into Pro, i & L-lights. Pans and tilts with the light. Collapses for storage.

Code: iP-53Weight: 4 oz (113 g)Fits directly on the light. Produces a reduced, soft-edged circle of light. A Barndoor Frame fits on the front, if needed.

Softens light, creates gentler, more flattering, but less dramatic, highlights and shadows. Light loss approx. 40% in flood. Without Holder iP-50 

Dichroic FilterConverts 3200°K light to average daylight. Light loss approximately one stop.Without Holder  

Full ScrimStainless-steel screen reduces light by approximately one stop. Unlike the Diffused Glass (or Frost Gel on Tota-frame) it will not diffuse or soften high-lights and shadows. Without Holder

Half ScrimStainless-steel screen covers half of the light and rotates 360° to reduce the light on any part of the subject or foreground that is too bright.Without Holder iP-55

Graduated ScrimStainless-steel screen sections reduce light more subtly and more completely than the Half Scrim. Rotates 360°. Useful to control subjects that become too bright as they approach a light, and fall-off on walls and ...

iP Prismatic GlassUse in Swing-in holder with Clear Glass in front housing for quick change from super spot to focusable.Without Holder iP-52 

Weight: 1 oz (28 g)Attaches to ViP lights. Accepts one Flexi-shaft.

Tota-tatchCode: T1-34Weight: 3.5 oz (98 g)Attaches to stands, shelves, tripods, etc. Accepts one Flexi-shaft.

Flexi-shaft (2)Code: T1-50Weight: 4 oz (113 g)Size: 16" (40.65 cm)Flexible arm can be bent and rebent. One rotating end simplifies precise positioning of Tota-flags and reflectors as well as Blips. The other end attaches directly to DP, ...

Tota-flagCode: T1-52Weight: 4 oz (113 g)Size: 8 x 12" (20.3 x 30.5 cm)Black panel of aircraft alloy aluminum snaps onto Flexi-shaft to shade subject, back-ground or camera lens. Makes a sharper, more controllable shadow than a barndoor.

Tota-brella Standard/SilverCode: T1-25Weight: 8 oz (227 g)Size: 27" (68.6 cm) open, 19" (48.3 cm) closed.Fits directly on ViP, Tota/Omni, & Fren-L 650 Accessory bracket to convert them to soft shadow sources. Woven, soft-silver ...

Special/WhiteCode: T1-26Same as above but with white surface that produces an even softer light, especially if brella is turned around & pointed to subject to light through it (in flood only)

Tota-frameCode: T1-20Weight: 6 oz (170 g)Size: For 10 x 12" (25.4 x 30.5 cm) gelsFolded: 12 x 1 x 1" (30.6 x 2.5 x 2.5 cm)Use with Tota/Omni lights & V-light. Pans and tilts with the light. Collapses for storage.

Accepts 10 x 12" gels for Tota/Omni Gel frame.  

Uni-standCode: UN-33Max. Height: 7'11" (2.4 m)Folded Length: 21.5" (54.6 cm)Max. Base Diameter: 3'7" (1.1 m)Min. Tube Diameter / Max. Tube Diameter: 3/8" (.95 cm) / 7/8" (2.2 cm)Weight: 2.4 lbs (1.1 kg)Legs/Number of Risers: Single-strut ...

Tota-clampCode: T1-30Weight: 4 oz (113 g)Supports medium weight lights and accessories on a 5/8" (1.59 cm) stud that pivots and locks in two positions. The clamp attaches securely to stands, pipes, shelves, etc. up to 1 7/8" (4.8 cm) ...

Tota-mountCode: T1-32Weight: 10 oz (284 g)Hangs, open or closed, on doortops. Gaffer-tapes to windows and many wall surfaces to support small lights, such as ViP and Tota/Omni, when stands are unavailable or in the way. With 5/8" (1.59 cm) ...

Weight: 2 oz (57 g)Supplied with V-light. It can also be used with the Pro and i-lights and the Cam-link or Vipod to extend or re-position a light.  

Enables Pro- and i-Lights to be camera-mounted with a Camlink or a 1/4-20 screw.

Weight: 1 oz (28 g)5/8" (1.59 cm) stud with 1/4-20 screw, supplied with the Vipod. Can be used with Cam-link or directly on some video cameras.  

Locks onto video cameras that have a female shoe. It accepts a Low-link, L-link, or Stud-link.  

Code: ViP-42Weight: 3 oz (85 g)For hand-holding ViP lights.

Scissor-mount (2)Code: CM-20Weight: 9 oz (250 g)Attaches small lights and accessories to grid of dropped-ceilings in offices and other areas. Use Gridlock (CM-21) with Pro-light. (Set of 2).

Code: CM-21Weight: 9 oz (250 g)Attaches Pro-light right side up to the T-bar of dropped ceiling grids. Can also be used with i and V lights. (1 only).  

Features/Specifications: 120 Volts 250 Watts 200 Hour Lamp Life Clear Finish G5.3 / 2-Pin Base Shape: T3 Overall Length: 57mm CC8 Filament CC Temp: 3200K ANSI: GCA LCL: 32MM LCL Burning Position: Universal

Features/Specifications: 120 Volts 125 Watts 200 Hour Lamp Life Clear Finish G5.3 / 2-Pin Base Shape: T3 Overall Length: 57mm CC8 Filament CC Temp: 3200K ANSI: FSH LCL: 32MM LCL Burning Position: Universal

Safety Cable (3)Code: CM-50Weight: 2 oz (57 g)Size: 34" (86.4 cm)Braided stainless-steel cable adds security to lights and accessories that are attached to overhead pipes, beams, dropped-ceiling grids, etc. (Set of 3).