SurgeX SXN1240
Power Condition 240V SingPhase

The SXN1240 provides guaranteed surge protection for dedicated power lines. The unit comes in a 12" x 12" x 4" NEMA enclosure and meets code for use in ceiling plenums. It is 20-amp load capable and is specifically designed for international use in 240 volt systems with single-phase power requirements. The standard model has one surge suppression module.

Features:

• Magnetic shielding steel enclosure
• Advanced Series Modesurge protection
• Advanced Impedance Tolerant EMI/RFI filtering
• Self-test circuit with visual indicator
• 10-year warranty
• Made in U.S.A.

Specifications:

• Load Rating: 20 amps @ 240 volts (single phase)
• Power Requirement (no load): 15 watts
• Surge Let-Through Voltage (6000-volt surge): )volts
• UL 1449 Adjunct Classification Test Results: 1000 surges,6000 volts, 3000 amps, B3 pulse; Measured suppressed voltage: 170 volts, nofailures
• Federal Guidelines: Grade A, Class 1, Mode 1  (CIDA-A-55818)
• EMI./RFI Filter, Normal Mode (50ohm load): 40 dB @ 100 kHz; 50 dB @ 300kHz;
  50 dB @ 3 MHz; 50 dB @ 30MHz
• EMI./RFI Filter, Common Mode (50ohm load): 18 dB @ 300 kHz; 30 dB @ 1MHz;
  50 dB @ 5 MHz; 50 dB @ 20 MHz
• Maximum Applied Surge Voltage: 6000 volts*
• Maximum Applied Surge Current: Unlimited, due tocurrent limiting
• Maximum Applied Surge Energy: Unlimited, due tocurrent limiting
• Endurance (C62.41-1991 Category B3 pulses): 1 kV>500,000;3 kV>10,000; 6 kV>1000
• Dimensions: 10.0" H x 8.0" W x 4.0" D
• Weight: 10lbs.
• Temperature Range: 5º to 35º C
• Humidity Range: 5% to 95% R.H., non-condensing
• Agency Listings: ETL and cETL (UL 1449, 2nd edition; CSA C22.2 No.8-M1986,R2000)

*1.2 x 50 µs pulse, industry standard combination wave surge, as per IEEE C62.41

Specifications subject to change without notice. SurgeX is a division of New Frontier Electronics Inc.