Aviom AN16/I
Input Module (Sixteen balanced 1/4" TRS)

AN16/I

The AN-16/i provides 16 balanced line-level inputs into a Pro16 system. Audio is converted to digital and transmitted via A-Net, up to 500'/150m over Cat-5e. A dedicated audio thru is available for each input channel, allowing the AN-16/i to be simultaneously inserted into an existing audio signal path.

Placed at a front-of-house or monitor console, the AN-16/i can be used as a head-end for a Pro16 Monitor Mixing System. Audio from the console - any combination of channel inserts, direct outs, submixes, auxes, or groups - is connected to the input channels on the AN-16/i. The A-Net Out on the AN-16/i is connected to the A-Net In of a Pro16 Personal Mixer or A-Net Distributor.

Used in conjunction with the AN-16/o Output Module, the AN-16/i can also be used in a digital snake as an input path for main return signals from front-of-house. The built-in A-Net Expansion jack allows two 16-channel A-Net streams to be combined onto a single cable (32x0 or 16x16), and the AN-16SBR System Bridge can be used to combine up to four 16-channel streams onto a single cable in a variety of bidirectional configurations.

The flexibility and simplicity of the Pro16 Series allows complex audio distribution systems and snakes to be created quickly and cost-effectively.

Features

• Sixteen balanced audio inputs (TRS connectors)
• Sixteen balanced Thru connectors (TRS)
• A-Net Out and A-Net Expansion network connections (RJ45)
• Stereo Link switches for each channel pair
• Four-position gain switches (+22, +4, 0, -10dB)
• Signal present and clip LEDs per channel

Specifications

• Audio Inputs: 16, balanced line-level, 1/4" TRS connector
• Inputs: Tip: Audio+; Ring: Audio-; Sleeve: Ground
• TRS Thru: Impedance matched output
• Analog to Digital Conversion: 48kHz sample rate, 24 bit
• Frequency Response: 4Hz-22kHz
• A-Net Output: one Category 5 (RJ45)
• A-Net Expansion: one Category 5 (RJ45)
• Gain Settings: Four-position switch, -10dBv, -0dBu, +4dBu, and +22dBu
• Channel LED Indicators: Signal Present and Clip, per channel
• Line Inputs: Impedance: 48k ohms
• Metering: LEDs; Green: Signal Present, Red: Clip; Per channel
• Stereo Operation: Stereo Link, per channel pair; Two-position switch (Normal, Link)
• Maximum Input Level: +22dBu
• Input Impedance: 17.8k ohms
• Freq. Response: 4Hz-22kHz +0.2dB/-3dB
• THD+N: <0.003%
• Crosstalk: -90dB
• Bit Error Rate (BER): 10(-12)
• Signal to Noise (unweighted): 90dB typical, A/D to D/A
  Measured from AN-16/i to AN-16/o Output Module
• Digital Outputs: A-Net; A-Net Expansion: 1; RJ45 connector
• A-Net Pro16: A-Net Expansion combines two A-Net streams (32 channels of audio onto one Cat-5e cable; use unshielded Cat-5e UTP (or better) cable
• Latency: <0.880 msec (measured from analog input to analog output)
• Power Supply
  Input Voltage: 100-240 volts, 50/60Hz, 30VA
  Output Voltage: 18-24 VDC, 0.5 amp
  Plug Size: 2mm
• Power: 18-24 VDC, 500mA
• Dimensions: 19" wide x 5.75" deep; 1U high
• Weight: 6.8 lbs
• Options: AN-16SBR System Bridge; used to combine up to four A-Net streams for transmission over one Cat-5e cable

Our Part #  AN16/I