JBL LSR6328P-PACKAGE

The LSR6328P is the choice for stereo and multi-channel music and post audio applications where accuracy and high SPL are required. With ruler-flat +1 dB/-1.5 dB response from 50 Hz to 20 kHz, low frequency extension to 36 Hz, boundary compensation and JBL's new RMC™ system, the LSR6328P gives you exceptional low frequency performance in any room. The system is bi-amped with a 250 Watt LF amplifier and a 120 Watt HF amplifier. Wall mounting provisions make the LSR6328P perfect for installation in multi-channel editorial rooms.

RMC™ Room Mode Correction provides electronic control of room modes for the JBL 6300 LSR Series. Through the use of a test CD, sound level meter and Q template, the user can identify any dominant room mode over the tuning range from 26 to 96 Hz that effects the LF response at the listening position. The inverse curve can then be entered into the system’s electronics – to exactly compensate the offending peak. Using the RMC Calibration Kit*, the user is also instructed specifically what to look for, and potentially poor room locations can be avoided. RMC kit contains all items required to carry out the RMC system calibration process. The LSR25P and LSR6332 enjoy the benefits of RMC when used in a system with the LSR6312SP Subwoofer.

Package includes: LSR6328P (x2), RMC Calibration Kit (x1)

• Advanced Linear Spatial Reference design ensures flatter-off-axis response for greater clarity at the mix position
• RMC™ Room Mode Correction provides electronic control of room modes. User measurement and calibration kit available.
• Differential Drive® technology with dynamic braking for extended low frequency response and minimal power compression.
• Integrated bi-amplification with factory calibrated sensitivities.
• Titanium composite high frequency transducer with Elliptical Oblate Spheroidal waveguide for precise pattern control.
• Magnetically shielded high frequency transducer minimizes interference when used in close proximity to video monitors.
• High-density baffle for low enclosure resonance.
• Linear Dynamics Aperture port design eliminates port turbulence and reduces port compression.
• Reinforced enclosure and convenient mounting points for mounted installation.
• Integral handles facilitate ease of positioning.

• Frequency Response (+1, -1.5 dB): 50 Hz - 20 kHz
• Enclosure Resonance Frequency: 38 Hz
• Low Frequency Extension: User controls set to default
• -3 dB: 46 Hz
• -10 dB: 36 Hz
• Low-High Frequency Crossover: 1.7 kHz 6th-order acoustic Linkwitz-Riley
• Maximum SPL (80 Hz - 20 kHz): >108 dB SPL / 1m
• Maximum Peak SPL (80 Hz - 20 kHz): >111 dB SPL / 1m
• Signal Input: Neutrik “Combi” XLR-¼-in tip-ring-sleeve balanced or unbalanced positive voltage applied to XLR pin 2 (¼" tip) produces outward woofer motion
• Calibrated Input Sensitivity, XLR & ¼":
• +4 dBu / +8 dBu: 96 dB SPL / 1 m
• -10 dBV: 96 dB SPL / 1 m
• Low Frequency Model: 218F
• Diameter: 203 mm (8 in)
• Voice Coil: 38 mm (1.5 in) Differential Drive® with dynamic braking coil
• Magnet Type: Ferrite, with integral heat sink
• Cone Type: Carbon fiber composite
• Impedance: 2 ohms
• High Frequency Model: 053TiS
• Diameter: 25 mm (1 in) diaphragm
• Voice Coil: 25 mm (1 in)
• Magnet Type: Ferrite, shielded
• Diaphragm Type: Damped titanium composite
• Other Features: Elliptical oblate spheroidal waveguide
• Impedance: 4 ohms
• Finish: Smooth dark graphite
• Handles: 2 each, flush mounted on sides
• Mounting: 4 threaded mounting points conforming to industry standard square pattern, 127 x 70 mm (5 x 2.75 in) center to center. M6 metric threads.
• Enclosure Volume (net): 28 liter (1 cu ft)
• Low Frequency Vent: Rear ported linear dynamics aperture (integrated with amplifier heat sink)
• Baffle Construction: Injection-molded structural ABS
• Enclosure Construction: 19 mm (¼ in) MDF
• Net Weight: 17.7 kg (39 lb)
• Dimensions (WxHxD): 406 x 330 x 325 mm (16 x 13 x 12.8 in)