JBL LSR6332-LEFT

Specify L (LEFT)

If you need a larger monitor with high SPL, for mid-field, soffit or behind the screen applications, the LSR6332 is your choice. This three-way non-powered system can handle 200 Watts continuous pink noise/800 Watts peak and will generate 112 dB SPL at 1 meter. The LSR6332 incorporates a 12" Neodymium Differential Drive® dual coil woofer, 5" Kevlar™ midrange speaker and 1" titanium composite tweeter.

• Advanced Linear Spatial Reference design ensures flatter response at the mix position.
• Neodymium Differential Drive NDD™ technology with dynamic braking for extended low frequency response and low power compression.
• Neodymium midrange with 2" voice coil and Kevlar™ cone material for extended frequency response and low distortion.
• Titanium composite high frequency transducer with elliptical oblate spheroidal waveguide and damped polepiece.
• High-Density baffle for low enclosure resonance and stable inertial ground.
• Linear Dynamics Aperture port design eliminates port turbulence and reduces port compression.
• Magnetically shielded for use near video monitors.
• Reinforced enclosure and convenient mounting points allow mounted installation.
• Midrange/high frequency sub-baffle may be rotated by user for horizontal or vertical orientation.
• Available as mirror image left and right models.

• Input Impedance (Nominal): 4 ohm
• Anechoic Sensitivity1: 93 dB/2.83 V/1 m (90 dB/ 1 W/ 1 m)
• Frequency Response (60 Hz – 22 kHz): +1. -1.5 dB
• Low Frequency Extension:
  • -3 dB: 54 Hz
  • -10 dB: 35 Hz
• Enclosure Resonance Frequency: 33 Hz
• Long Term Maximum Power (IEC265-5): 200 W continuous average; 800 W peak
• Recommended Amplifier Power: 150 W - 1000 W (rating into 4-ohm load)
• High Frequency Control (2.5 to 20 kHz): 0 dB, -1 dB
• Low Frequency Model: 252G
  • Diameter: 300 mm (12 in)
  • Voice Coil: 50 mm (2 in) Differential Drive® with dynamic braking coil
  • Magnet Type: Neodymium
  • Cone Type: Carbon Fiber Composite
  • Impedance: 4 ohms
• Mid Frequency Model: C500G
  • Diameter: 125 mm (5 in)
  • Voice Coil: 50 mm (2 in) aluminum edge wound
  • Magnet Type: Neodymium
  • Cone Type: Kevlar™ composite
  • Impedance: 4 ohms
• High Frequency Model: 053TiS
  • Diameter: 25 mm (1 in) diaphragm
  • Voice Coil: 25 mm (1 in)
  • Magnet Type: Ceramic 5
  • Diaphragm Type: Damped titanium composite
  • Other Features: Elliptical oblate spheroidal waveguide
  • Impedance: 4 ohms
• Finish: Smooth dark graphite
• Enclosure Volume (Net): 50 liter (1.8 cu ft)
• Input Connectors: 5-way binding posts
• Input Features: Bi-wirable
• Mounting: 4 threaded mounting points conforming to industry standard square pattern, 127 x 70 mm (5 x 2.75 in) center to center. M6 metric thread.
• Baffle Construction: Injection molded structural ABS
• Enclosure Construction: 19 mm (3/4 in) MDF
• Net Weight: 20.4 kg (45 lb)
• Dimensions (WxHxD): 63.5 x 39.4 x 29.2 cm (25.0 x 15.5 x 11.5 in)