JBL LSR6328P
Bi-Amp Loudspeaker w/ Room EQ

LSR6328P

The LSR6328P is the choice for stereo and multi-channel music and post audio applications where accuracy and high SPL are required. With ruler-flat +1 dB/-1.5 dB response from 50 Hz to 20 kHz, low frequency extension to 36 Hz, boundary compensation and JBL's new RMC™ system, the LSR6328P gives you exceptional low frequency performance in any room. The system is bi-amped with a 250 Watt LF amplifier and a 120 Watt HF amplifier. Wall mounting provisions make the LSR6328P perfect for installation in multi-channel editorial rooms.

• Advanced Linear Spatial Reference design ensures flatter-off-axis response for greater clarity at the mix position
• RMC™ Room Mode Correction provides electronic control of room modes. User measurement and calibration kit available.
• Differential Drive® technology with dynamic braking for extended low frequency response and minimal power compression.
• Integrated bi-amplification with factory calibrated sensitivities.
• Titanium composite high frequency transducer with Elliptical Oblate Spheroidal waveguide for precise pattern control.
• Magnetically shielded high frequency transducer minimizes interference when used in close proximity to video monitors.
• High-density baffle for low enclosure resonance.
• Linear Dynamics Aperture port design eliminates port turbulence and reduces port compression.
• Reinforced enclosure and convenient mounting points for mounted installation.
• Integral handles facilitate ease of positioning.

• Frequency Response (+1, -1.5 dB): 50 Hz - 20 kHz
• Enclosure Resonance Frequency: 38 Hz
• Low Frequency Extension: User controls set to default
  • -3 dB: 46 Hz
  • -10 dB: 36 Hz
• Low-High Frequency Crossover: 1.7 kHz 6th-order acoustic Linkwitz-Riley
• Maximum SPL (80 Hz - 20 kHz): >108 dB SPL / 1m
• Maximum Peak SPL (80 Hz - 20 kHz): >111 dB SPL / 1m
• Signal Input: Neutrik “Combi” XLR-¼-in tip-ring-sleeve balanced or unbalanced positive voltage applied to XLR pin 2 (¼" tip) produces outward woofer motion
• Calibrated Input Sensitivity, XLR & ¼":
  • +4 dBu / +8 dBu: 96 dB SPL / 1 m
  • -10 dBV: 96 dB SPL / 1 m
• Low Frequency Model: 218F
  • Diameter: 203 mm (8 in)
  • Voice Coil: 38 mm (1.5 in) Differential Drive® with dynamic braking coil
  • Magnet Type: Ferrite, with integral heat sink
  • Cone Type: Carbon fiber composite
  • Impedance: 2 ohms
• High Frequency Model: 053TiS
  • Diameter: 25 mm (1 in) diaphragm
  • Voice Coil: 25 mm (1 in)
  • Magnet Type: Ferrite, shielded
  • Diaphragm Type: Damped titanium composite
  • Other Features: Elliptical oblate spheroidal waveguide
  • Impedance: 4 ohms
• Finish: Smooth dark graphite
• Handles: 2 each, flush mounted on sides
• Mounting: 4 threaded mounting points conforming to industry standard square pattern, 127 x 70 mm (5 x 2.75 in) center to center. M6 metric threads.
• Enclosure Volume (net): 28 liter (1 cu ft)
• Low Frequency Vent: Rear ported linear dynamics aperture (integrated with amplifier heat sink)
• Baffle Construction: Injection-molded structural ABS
• Enclosure Construction: 19 mm (¼ in) MDF
• Net Weight: 17.7 kg (39 lb)
• Dimensions (WxHxD): 406 x 330 x 325 mm (16 x 13 x 12.8 in)

Our Part #  LSR6328P