AKG GN15HT
Gooseneck Adapter 6" for a wireless transmitter

GN15HT

All installation modules except LM 3 feature a status LED ring normally powered off the phantom supply voltage. When the microphone has been correctly connected and the system and phantom power switched on, the LED ring will glow at medium brightness. Thus, the sound system operator will know at a glance which microphones have been installed correctly. Note that in this configuration the LED ring only indicates the system is ready to operate (NOT that the microphone is open!). However, all installation modules except for the E versions allow the LED ring to be powered from an external supply for “open mic” indication. In this mode, the LED ring will light much more brightly to alert the talker that their mic is open. Where neither of these functions is desired, the user may deactivate the LED ring altogether. This allows you for the first time to select status indicator modes without having to buy a new microphone. GN 15 - approx. 6-in. (15-cm) gooseneck with external in-line XLR phantom power adapter for permanent screw-on installation GN 15 E - approx. 6-in. (15-cm) gooseneck with integrated XLR phantom power adapter for temporary installation GN 15 ES - approx. 6-in. (15-cm) gooseneck with integrated low-noise on/off switch GN 15 E/5 - approx. 6-in. (15-cm) gooseneck with 5-pin XLR for external control of light ring GN 15 HT - approx. 6-in. (15-cm) gooseneck module for attachment to a handheld wireless transmitter.

Bass cut filter: 250 Hz, -10 dB at 50 Hz Electrical impedance:: <600 O Recommended load impedance: >2,000 O Power requirement: 9 to 52 V phantom power Current consumption: <3 mA Connector: 3-pin. male XLR, GN 30 oc: tinned undeterminated cable ends Cable length: GN 30 oc: 1.5 m (5 ft.) Finish: matte dark gray Size: max. dia.: 20 mm (0.8 in.), lenghth: 160/305/500 mm (6.4/.12/20 in.) Net/shipping weight: 72/400 g (2.5/14.1 oz.), 110/522 g (3.9/18.4 oz.), 120/495 g (4.2/17.5 oz.) Standard accessories: DPA phantom power adapter, screw set with rubber bush Optional accessories: MF-DA installation flange, H 600 + A 608 shock mount, ST 45 table stand, B 18 battery power supply, N 62 E + N 66 E AC power supplies a handheld wireless transmitter

Our Part #  GN15HT