Shure P6HWE3

This system includes:

• P6HW Wired Bodypack Personal Monitor
• E3 Single-Driver Earphones

The Shure P6HW hardwired Personal Stereo Monitor is a two-channel system designed to replace loudspeakers used for onstage monitoring. The P6HW has several advantages over onstage monitor loudspeakers: it is less visible, offers improved clarity and control of sound, and reduces the chances of feedback. This portable, lightweight unit also allows freedom of movement while reducing stage clutter. It is a versatile system, designed for use in many different sound reinforcement applications: public address, live music, studio recording, broadcast, and theater.

Features:

• Peak limiter with fixed threshold, DIP switch defeatable
• Stereo or MixMode control for custom monitor mixes
• Easily accessible volume and balance controls
• Shelving, high frequency boost switch
• Input Clip indicator
• 15 dB input pad switch
• Low Battery Indicator

P6HW Wired Bodypack Specifications:

• Frequency Response: 26 Hz to 90 kHz (-3 dB)
• Total Harmonic Distortion:
      * 0.18% = 18ohms
      * 0.08% = 63 ohms
• Channel Separation: 40 dB (minimum)
• Signal-to-Noise Ratio: 85 dB (minimum)
• Output Level: +4.5 dBu (maximum level, 1% THD)
• Minimum Load Impedance: 16 ohms
• Battery Life (with E3 earphones): 10 to 12 hours (depending on volume)
• Maximum input level:
      * +22 dBu, input padON
      * +7 dBu, input pad OFF
• Input Impedance:
      * 44 kohms, input padON
      * 77 kohms, input pad OFF
• Connectors
      * Output: 3.5mm stereo (Tip=L+, Ring=R+,Sleeve=Ground)
      * Input: 5-pin (pin 1 indicated by red dot), phantom power poretected
• Dimensions: 111 x 64.5 x 31.9 mm (4.371" x 2.54" x 1.256")
• Net Weight: 209.8 g (7.4 oz)

E3 Specifications:

• Transducer Type: Balanced Armature
• Sensitivity: 115 dB SPL/mW
• Impedance 26 ohms
• Connector: Gold-plated, stereo, 3.5 mm (1/8") plug
• Cable Length: 1.57 m (62")