AKG C414B/XL2-STEREO

Factory-matched stereo pair of C414B/XLII large diaphragm condenser microphones. The matched pairs consist of two microphones that come closest to each other in sensitivity and frequency response when used in the cardioid mode. The kit includes all the standard accessories of the deluxe package (excluding the PF 80 external pop filter) along with a stereo bar and proof of performance charts.

The C414B/XLII has been carefully designed to maintain the legendary sonic character of the C414 family while integrating new features and performance enhancements made possible by new technology. The C414B/LXII capsule delivers the famous AKG "voice-friendly" sound for beautifully-detailed vocals and also works well for distant-miking of solo instruments.

The microphone's 5 pickup patterns are easily selectable via an electronic switch with LED indication and offer the selection of omnidirectional, cardioid wide cardioid, hyper cardioid and figure-eight patterns.

The pickup pattern selector switch utilizes a dual-color LED indicator that provides visual indication of the pattern selected and also changes from green to red to indicate if the microphone's output electronics are being overloaded. The pattern selector can also be used to "lock" the microphone's switch settings by pressing and holding it for 3 seconds.

On the rear of the microphone, an electronic switch allows the selection of -6, -12 and -18 dB pre-attenuation levels which are accomplished by changing the polarization voltage to the capsule. The C414B/XLII has switchable bass cut filters of 12 dB-per-octave at 40 Hz and 80 Hz, and a 6 dB-per-octave filter at 160 Hz for control of proximity effect. On-axis sensitivity for all patterns is 23 mV/Pa and its self-noise is an extremely low 6 dB-A.

The C414B/XLII has a transformerless output and all-metal chassis, making it immune to electrical interference and RF from digital equipment, video monitors and wireless systems. It comes complete in an all-metal road case with the AKG H-85 shock mount, a PF80 external two-stage pop filter, a W414X external windscreen and an individually-measured chart showing the response curve of the microphone. It is also available in factory-matched stereo pairs packaged with a H50 stereo bar instead of the external pop filter.

The C414B/XLII is built in Vienna, Austria and comes with a three-year limited parts and labor warranty.

Features

• High sensitivity and extremely low self noise
• Five switchable polar patterns for placement and application flexibility
• Two-color LEDs provide quick visual indication of selected polar patternand output overload
• Elastic capsule suspension greatly minimizes structurally-transmittednoise from chassis vibration
• H 85 professional shock mount/stand adapter, PF 80 external pop filter andW 414 X external windscreen
• High sound pressure level capability and wide dynamic range Completelyimmune to electrostatic and electro-magnetic interference from digital gear,computer monitors, etc. thanks to solid metal housing and transformerlessoutput stage
• Three switchable bass cut filters and three pre-attenuation pads with LEDsfor quick visual indication
• All switchable components operate in low impedance circuits for ultra-highrelability even in extremely humid conditions
• Optional R 414 remote control unit offers full control of all switchableparameters via standard microphone cable and 3-pin XLR-type connectors
• Also available in stereo pair

Specifications

• Type: 1" large diaphragm pressure gradient microphone
• Polar Patterns: Omnidirectional, wide cardioid, cardioid, hypercardioid,figure eight
• Frequency Range: 20 to 20,000 Hz
• Sensitivity: 23 mV/Pa (-33 dBV) +/-0.5 dB
• Max. SPL: 140/146/152/158 dB SPL (at 0/-6/-12/-18 dB)
• Preattenuation Pad: -6, -12,-18 dB, switchable
• Bass Cut Filter Scope: 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160Hz
• Power Requirements: 48 V phantom power to DIN/IEC
• Connector: 3-pin XLR
• Dimensions: 2" x 1.5" x 6.3"
• Net Weight: 10.6 oz
• Shipping Weight: 5 lbs