Rode S1
Handheld Performance Super Cardioid Condenser Mic

S1

The S1 is a professional quality microphone, specifically designed for live vocal performance.  The S1 employs a true condenser transducer for optimal sound reproduction. The frequency response is tailored to ensure clear vocals while reducing handling noise. The unidirectional (super cardioid) pick up pattern limits background noise and reduces the susceptibility to feedback.  The five piece mesh head provides filtering of breath, wind, and plosive noise whilst not interfering with the S1’s sensitivity or frequency response.  The hardened mesh head also protects the precision condenser transducer from air borne contaminants  and possible impact during performance and transit. The ergonomic design of the S1 also makes it extremely comfortable to hold and control during performance.  The S1 requires P48V phantom supply and will work with most professional mixing consoles that  incorporate this standard. The high level output of the S1 is electronically balanced to reduce loss over long cable runs with the additional benefit of high level rejection of electromagnetic interference.

The S1 is designed to operate from phantom power to the P48 standard.  It may be supplied from either an external stand alone phantom supply or from a console with internal supply. The S1 will operate between 44V and 52V applied with positive polarity to pin 2 and pin 3 of the output XLR connector.

The S1 will operate satisfactorily into a load impedance as low as 1k.. If a load below this is used, the output signal level will be reduced.  The S1 output is balanced between pin 2 (hot) and pin 3(cold). Pin 1 is ground.

Features:

• Studio recording quality specification
• Supercardioid polar pattern
• Rugged all metal construction
• Attractive satin nickel finish/Black model also available (S1-B)
• Heat treated high strength mesh head
• Custom designed internal plosives screen
• Low handling noise

Specifications:

• Power: P48 (48V) phantom supply
• Acoustic Principle: Pressure gradient
• Directional Pattern: Super Cardioid
• Frequency range: 20 Hz - 20 kHz
• Output impedance: 50O
• Signal noise ratio: 75 dB SPL (A - weighted per IEC651)
• Equivalent noise: 18 dB SPL (A - weighted per IEC651)
• Maximum SPL: 151dB SPL (@ 1kHz, 0.7% THD into 1KO load)
• Maximum output voltage: +12.5dBu (@ 1kHz, 0.7% THD into 1KO load)
• Sensitivity: -46 dB re 1 Volt/Pascal (5 mV @ 94 dB SPL) +/- 2 dB @ 1kHz
• Weight: 308gm
• Dimensions: 183mmH x 52mmW x 52mmD

Our Part #  S1-RODE