Telex ACS-101
Antenna Splitter 7190001

ACS-101

The ACS-101 (Antenna Combiner-Splitter 10-to-1) is an amplified and filtered broadband splitter-combiner. It allows up to ten UHF base stations to use only one transmit and one receive antenna. The antenna combiner section contains innovative hybrid coupling, amplifying and matching technology to combine ten transmitters to one output with very low intermod distortion. The antenna splitter section has broadband input filtering and amplification to maintain signal levels through the splitters. High output isolation between ports is also achieved. The industrial strength power supply of the ACS-101 supplies voltage and current to two outputs on the product. Each output can supply up to 5 amps at 12 VDC.

Features:

• 115 VAC or 230 VAC Operation
• High-Quality TNC Connectors Ensure Consistent Impedance Across the Entire Frequency Range
• Ideal for Use with BTR-1, RKP-4B, BTR-500, BTR-600, & BTR-700 Wireless Intercom Systems
• Rackmount Brackets Included for 19" (482.6 mm) Rack
• Standard IEC 320 Power Input Connector
• Two Power Outputs to Supply up to Ten Transceivers

Specifications:

• Overall
  Antenna Connectors: Standard TNC Receptacles
  AC Input Power:100-120 VAC, 60 Hz, 6A max
  AC Input Fuse: 10 A, 250 V, 3AG
  DC OutputPower: 12 VDC, 5 A for each output
  DC Output Jacks: Two, 5.5mm x 2.1 mmJacks
  DC Output Fuses: 5 A, 250 V, 5mm x 20 mm
  Size: H: 3½" (88.9 mm) xW: 16¾" (426 mm) x D: 14.63" (372 mm)
  Weight: 10 lbs., 4 oz., (4.65 kg)
• Antenna Splitter
  Frequency Range: 614-746 MHz
  Output IP3: Greaterthan 30 dBm
  Net Gain: 0 dB Typical
  Noise Figure: Less than 4.5dB
  Minimum Isolation: 20 dB between adjacent ports. Greater than 20 dB between non-adjacent ports
• Antenna Combiner
  Frequency Range: 470 - 608 MHz
  Net Gain: 0 dB(Maximum)
  Noise Figure: 10 dB Typical
  Output IP3: -55 dBc @ +17 dBm input on each transmitter

Our Part #  ACS-101