Datavideo Corporation TBC-1000

Most video camcorders produce relatively unstable, synchronized signals. This can cause poor video image quality when capturing to your PC or recording to another deck. The TBC-1000 corrects this by replacing all sync signals from the video source with new signals. Note: NO EXTERNAL GENLOCK. Note2: This TBC passes line 21.

Features

• Self contained - stand alone.
• Compatible with VHS, VHS-C, S-VHS, S-VHS-C Video 8, Hi 8 and Digital 8 format.
• Digital frame synchronization with full frame memory.
• Re-generates all synchronization signals to stabilize the video.
• Auto-detects NTSC or PAL format.
• Wide bandwidth-4.5MHz in Y/C and 3.5MHz in composite.
• 8-bit video resolution–4:2:2 sampling rate DP < 1 Degree–DG less than 2%.
• Low noise - S/N ratio > 50dBBuilt in DA with 4 outputs.

Specifications

• Inputs: Y/C Video (S-Video) 4-pin 75 ohm DIN connector (1); Composite video 75 ohm RCA connector, Level: 1.0Vp-p (1); Stereo Audio RCA Connectors, Impedance: 100k ohm (1)
• Outputs: Y/C Video (S-Video) (4); pin 75 ohm DIN connector (4); Composite video 75 ohm RCA connector, Level: 1.0Vp-p/Unity; Stereo Audio RCA Connectors, Impedance: 1k ohm, Level: unity (4)
• Frequency Response S-Video 4.5MHz +/-3dB
• DG, DP +/- 2%, 1
• S/N Ratio > 50dB
• Component Y.U.V. 4:2:2 8-bit, Y: 13.5MHz
• Single channel full frame Time Base corrector
• Auto Detects NTSC and PAL signals
• Power requirement DC 12V, 1.2 amps
• Ambient Temperature range 32°-131° F (0°-55° C)
• Ambient Humidity < 90%
• Weight 7 lbs
• Accessories: Y/C (S-Video) 4' (2); Composite (RCA) Cables 5' (2); DC 12V 1.2 amp supply (110V or 220V)

TMGR# TBC-1000