Whirlwind IMCOML
IMP Line Level Combiner

IMCOML

Use the line level combiner when you want to create a mono mix from a stereo source but need to keep the original stereo signals isolated. It's great for feeding a DAT player or CD into a mono system or single channel on a board. This unit not only combines two line-level signals into one line level output, it also compensates for the 6dB of gain that occurs when two in-phase signals are combined. A handy ground-lift switch breaks the shield connection between the inputs.

Specifications:

• Frequency response: +/-0.3dB 20Hz-20kHz
• Total harmonic distortion & noise: Less than 0.025% at 1kHz
• Isolation between inputs: Greater Than 42dB
• Insertion loss: -0.6dB, 50 Ohms source impedance -3.8dB, 200 Ohms source impedance
• Output level: -3.8dB with both channels at 0dB sine wave input, in phase
• Maximum input level: +28dBm
• Input impedance: 600 Ohms
• Output impedance: Less than 100 Ohms

Our Part #  IMP-LINE-COMBINER