Clear-Com RS603R

Dual channel with 4-pin female and male XLR, 4-pin male XLR headset connector, 2.5mm AUX headset connector and an RS-232 connector. Onboard switch selects loop through connector as audio program in. A separate volume control sets program level. RTS line compatible. AC call signaling on both channels; DC call signaling on Channel B (reversible). Channel exclusive allows use as a single channel beltpack.

Clear-Com continues its leadership in party line technology with the latest generation RS-600 Series beltpacks. The world's most advanced party line beltpack is designed to serve the needs of all users, whether first-time or experienced pros. All models offer a host of leading-edge features with simple-to-use straightforward operation. They provide excellent audio quality and are rugged enough to survive the day-in, day-out abuse of demanding professional applications. Like all Clear-Com beltpacks before them, the RS-600 Series offer the best sounding party line in the business. Exclusive audio shaping; powerful, high-headroom headphone amps, noiseless switching and built in mic limiters are key parts of the package.

With all the standard-setting performance and features of the 500 Series incorporated, Clear-Com has added additional features like TW compatibility, headset call tone and a seven-segment LED to assist in selection of on-board setup options (no opening the beltpack or counting of "beeps" required). Put all of this into the most compact and ergonomic package available and the RS-600 Series clearly sets the new standard in the beltpack world.

Each beltpack's functions are easily customized to fit the users needs. This is accomplished with on-board setup, which provides access to the most commonly varied functions (Talk button latch type, Call on Talk, Mic Level, etc.). For the most demanding applications, additional options can be selected from a PC with the available V-Pack software. In either case, once set up, the beltpack holds up to four of these configurations, called Modes, in memory until changed again, even if disconnected from a system. If the original factory default modes are desired, they can quickly be recalled.

• Power LED
• Programming LED (seven segment display)
• 2.5 mm Auxiliary headset jack (for use with Clear-Com CC-25 headset)
• Listen level knob per channel
• Sidetone trim pot per channel (external access)
• Talk button per channel
• Call button per channel
• Talk LED per channel
• Call Signal LED per channel
• On-board Setup
• 4 setups stored in non-volatile memory
• Beltpack set-up activate button
• 3.5mm data jack for programming (RS-232)
• Rotatable beltclip

• Microphone Preamp
  • Headset Mic Impedance: 200 ohms
  • Gain, mic to line: 41 dB (dynamic)
  • Limiter Range: 26 dB
  • Frequency Response: 200 Hz-12 kHz, contoured for maximum intelligibility
• Headphone Amplifier
  • Load Impedance: 40-2,000 ohms
  • Output Level: +17dBv before clipping
  • Gain, line to output: +34 dB
• Connectors
  • Intercom Line: (2) 3-pin XLR-M-F
  • Headset: 4-pin XLR-F
• Dimensions (H x W x D): 4.58" x 3.73" x 1.34"
• Weight: 7.8 oz