Kramer FC7402
SDI to Analog Converter

FC7402

The Kramer FC-7402 is a multi-standard, adjustment-free digital to analog converter designed to accept an SDI (4:2:2 serial digital video) input, provide a reclocked and equalized SDI output, and convert to analog outputs in the four common signal formats: composite video, s-Video (YC), RGsB, or Y, R-Y, B-Y. Full ProcAmp control of the video image is also available via the front panel and 7-segment display, and via RS-232 - with the option of storing settings in non-volatile memory. The FC-7402 also has an internal 75% color bar generator, whose timing is based on the SDI input. The FC-7402 encodes 525 line signals to NTSC 3.58 or NTSC 4.43, and 625 lines to PAL-B, D, G, H, I or Combination PAL-N. When encoding NTSC, it can be programmed with or without a 7.5 IRE setup (pedestal).

Specifications:

• Input: 1 SDI: SMPTE - 259M, ITU-R BT.601 (CCIR-601)75ohm on a BNC connector
• Outputs: 1 composite video - 1Vpp/75ohm on a BNCconnector. 1 YC - 1Vpp/75ohm (Luma), 0.3Vpp/75ohm (Chroma) on a 4p connector.1 component - RGB / Y, R-Y, B-Y (1V, 0.7V, 0.7V/75?) on BNC connectors. 1 SDI(reclocked): SMPTE - 259M, ITU-R BT.601 (CCIR-601) 75? on a BNC connector
• Resolution: 10-bit
• Bandwidth (-3dB): 5MHz, Fully Loaded
• Non-Linearity: +/-1.0%
• Diff. Gain: 0.11% (NTSC)
• Diff. Phase: 0.33 deg (NTSC)
• K-Factor: 0.3%
• S/N Ratio: 67dB unweighted
• YC Delay: < 20ns
• Equalization: > 125m for Belden 8281 cable
• Control: Level: - RS-232 and front panel: brightness,contrast, color (saturation and separate U, V), hue, and sharpness. Frontpanel lock
• Power Source: 230 VAC, 50/60 Hz, (115 VAC, USA) 13.8VA
• Dimensions (W x D x H) 19" x 7" x 19" (1 RUrackmountable)
• Weight: 5.7 lbs. (2.6 kg)
• Accessories: Power cord

Our Part #  FC7402