Tannoy I9-TANNOY

The i9 utilises four 5" low frequency direct radiating drive units and three 1" titanium tweeters arranged in a tall slim cabinet as a line source. The coupling effects in the vertical plane result in a narrow (60°) controlled coverage pattern from 500MHz, with extremely wide horizontal coverage (120°). The complex frequency shading and integration techniques employed in the internal passive crossover network result in a smooth and uniform frequency response from 80Hz to 30kHz. The rotary switch located on the rear termination panel allows the selection of low impedance or 100 Volt/70.7 Volt distributed line system configurations. The Tannoy THP 60 Watt transformer, included in the i9, can be selected for 60, 30, 15, 7.5 Watts, providing high system sensitivity with low insertion loss. The shallow cabinet profile and 5° downward tilt angle on the front baffle ensures discreet installations, using the i9Y yoke and i9 MAB (multiple angle bracket), can be implemented close to a wall or ceiling without sacrificing vertical coverage.

Specifications

• System Type: Column Loudspeaker
• Frequency Response: (+/-3dB) 80Hz - 30kHz
• Recommended Amplifier Power: Up to 300 Watt/8 ohms
• Power Handling: (Average) 150 Watt, (Programme) 300Watt
• Sensitivity 2.83 Volts @ 1 meter: (Anechoic) 93dB,(Half Space) 96dB
• Maximum SPL: (Average) 93dB, (Half Space) 96dB
• Wattage Tap Selections: 60, 30, 15, 7.5 Watts
• Switchable Transformer Options: 70 Volt/100 Volt or 8ohms
• Impedance: 8 ohms
• Crossover Frequency: 200Hz, 3.3kHz, 11.5kHz
• Crossover Type: Passive
• Dispersion: 120° x 60° (H x V)
• Driver Complement: 4 x 5" bass unit, 3 x 1" titaniumtweeter
• Enclosure: 14.5 liter MDF infinite baffle withperforated steel grille
• Finish: Textured Charcoal or White - paintable
• Connectors: 2 x Neutrik Speakon (NL4MP)
• Fittings: 2 x M10 threaded inserts
• Mounting Options: (i9Y) Yoke, (i9 MAB) Multiple anglebracket
• Dimensions: 30 9/16" x 6 11/16" x 7 7/8"
• Weight (each) 27lbs 9oz