Community RMG200A

The RMG200A is a complete horn/driver system designed for use in stand-alone voice-range sound reinforcement and announcement/signaling applications.

The RMG200A provides focused, high output sound projection, with predictable performance and exceptional long-term durability.

The horn portion of the assembly is a handcrafted one-piece waveguide, precision molded in hand-laminated, fiber-reinforced fiberglass for optimum performance. With substantial fiberglass layering and integral throat and driver flange construction, the horn is built to withstand substantial torque loads. The inherent strength and rigidity of the fiberglass construction enhances sonic efficiency by preventing sound energy loss, as well as providing inherently weatherproof fabrication.

The compression driver is a high output, high sensitivity loudspeaker that is configured with the diaphragm facing forward, isolating the voice coil and magnetic structure from the environment. The one-piece, non-metallic diaphragm/suspension offers exceptional resistance to the effects of humidity, dust, and corrosive atmospheres. The large area, low compression phase plug loading and large magnet structure exhibits extremely low distortion at high outputs while maintaining high efficiency and low power compression.

A fiberglass rear cover protects the driver and transformer from the effects of weather and corrosion.

There is a five-year warranty against manufacturing defects on all components of the system.

Applications

• Voice Warning Systems
• Large Public Gatherings
• Industrial Paging

Features

• 2" Throat Exit M200A
• Low Distortion, High Efficiency
• High Power Output
• Non-metallic Diaphragm
• Highly Resistant to Harsh Environments

Specifications

• Operating Range: 400Hz-4700Hz
• Max Input Ratings: 75W continuous, 120W program
• Recommended Power Amplifier: 100W to 140W @ 70V
• Maximum Output: 134 dB SPL/141 dB SPL (peak)
• Nominal Impedance: 11 ohms
• Crossover Frequency: 500Hz/5kHz
• Recommended Signal Processing: 400 Hz high pass filter
• Drivers: MF (1) M200A, Ferrofluid-cooled
• Input Connection: 16 gauge, 2 conductor, 12' SJOW cable through gland nut
• Enclosure: Fiberglass
• Mounting/Rigging Provisions: (4) 1/4" holes at the corners of the horn mouth
• Required Accessories: 400 Hz high pass filter
• Supplied Accessories: None
• Dimensions (H x W front x W rear x D): 9.75" x 17.5" x 10.5" x 25"
• Weight: 20 lbs (net); 24 lbs (shipping)