Dynaudio Acoustics AIR-6-MASTER-AD
Monitor, 2-way Active Nearfield, 6.5" Woofer, 200W PWM, Analog & Digital Inputs, Master Unit

AIR-6-MASTER-AD

Intelligent two-way active nearfield monitor with a 6.5” woofer and a 1.1” soft dome tweeter.

AIR6 is developed for both stereo and multichannel monitoring in any demanding environment including:

• Post Production
• Music Recording and Mixing
• Film Editing (smaller rooms)
• DVD authoring and Mastering
• 5.1 Production (Audio or Audio for pictures)
• Broadcast
• Edit suites

Typical listening distance 1.2-2m / 4-7ft. Typical room size 50-100m3 / 1600-3500ft3

Features

• 6.5" woofer and 1.1 soft dome tweeter
• 192 kHz support via Dual Wire
• Bass Management, with selectable frequency crossoverpoints
• Advanced Bass Management
• Acoustic Placement Compensation
• Preset Storage and Recall
• Programmable reference levels
• Level alignment in 0,1dB steps
• All Monitors aligned within +/- 0.2dB precision
• Integrated Parametric EQ’s and delay in each monitor(only accessible with PC-IP)
• Central and Remote control of system and parameters
• Direct Digital inputs and Analog inputs (optional)
• Networking in-between all AIR components
• Dedicated AIR Base subwoofers
• Two times 200-watt amp package in each monitor

General Specifications

• System: 2 way active NearField Monitor
• Total Frequency response: 40 Hz – 22 kHz / 33 Hz – 22kHz : +/- 3dB
• Max SPL 1m, pair (IEC short term): 128 dB peak / 128dB peak
• Max SPL 2m, 5.1 (IEC short term): 126 dB peak / 126dB peak (no LFE )
• Precision of Monitor matching: +/- 0.2 dB
• Port tuning frequency: 45 Hz
• Internal Cabinet volume: 12.1 liters
• Bass principle: Bass reflex
• Crossover frequency: 2150 Hz (DSP generated)
• Crossover slope: 24dB/oct (Linkwitz Riley, DSPgenerated)
• Tweeter: Esotec 1.1" soft dome, rear chamber,magnetic fluid, 4 mm die-cast alu front, pure aluwire voice coil
• Woofer: 6.5" one-piece molded polyprop dome, 3" purealu voice coil
• Mains voltage: 100 to 240 VAC, 50 to 60 Hz(auto-select)
• Power consumtion: Idle: 50W / Max: 375W

Finish

• Amp: Black anodized alu back plate
• Cabinet: Dark gray MDF baffle, Silver foil
• Dimensions (H x W x D): 338 x 216 x 345 mm
• Weight, Depth incl. amp & driver: 382mm, 9.8kg

Amplifier Specifications

• Tweeter: Separate 200W PWM amp
• Woofer: Separate 200W PWM amp
• Internal sample rate: 96 kHz
• External sample rate: 31-97 kHz

AIR Masters

• I/O Connectors:  XLR (2 channels AES/EBU in) 3 xRJ 45 proprietary TC Link
• Formats: AES/EBU (24 bit)
• Word clock input: BNC, 75ohm, 0.6-10 Vpp
• Display: 2 x 16 character dot matrix
• Operation: Menu system / Four bottoms

Analog Input

• Input connectors: XLR balanced (pin 2+, pin 3-)
• Impedance: 10/3 kohm (Balanced/Unbalanced)
• Selectable Full scale Input level: +9, +15, +21, +27dBu
• Dynamic range: > 113 dB typ. (Unwighted), BW:20-22kHz
• THD+N: < -105 dB typ. @ 1 kHz, -3 dBFS
• Crosstalk: < -120 dB, 20Hz to 20kHz
• A to D Conversion: 24 bit (dual bit delta sigma sampling @ 4.1/5.6/6.1/6.1MHz)

AIR Series goes far beyond conventional monitor performance – both in terms of sound, operation and thinking. Consisting of a number of intelligent components that communicates through a network, an AIR system always adds up to a complete and integrated solution for critical monitoring. This both for stereo and multichannel systems.

All components in an AIR system are connected through the TC Link network that distributes control information as well as Audio in-between all system components. This makes it possible to control a multichannel system from the sweet spot using the AIR Remote or the AIR Soft. This combined with "local intelligence" inside each monitor and subwoofer, provides AIR series with powerful integrated features.

Our Part #  AIR-6-MASTER-AD