Dynaudio Acoustics AIR-25-DIGITAL-MASTR
Monitor, 3-way Active Nearfield, 2 x 10" Woofer, 5.5" Midrange, 200W PWM, Digital Inputs, Master Unit

AIR-25-DIGITAL-MASTR

3-way Active Nearfield, 2x10" woofer, one 5.5" one-piece molded polyprop midrange & one 1.1 soft dome tweeter.

The AIR 25 offers transparency, consistent speaker performance and outstanding possibilities for optimizing performance in different Acoustical environments. Operating at a staggering sample rate of 192 kHz supported via Dual Wire, the integration with DAWs is seamless. A digital output can be fed directly into the AIR 25 supporting 2.1, 5.1, 6.1 and 5.3 setups. The AIR 25 is developed for both stereo and multi-channel monitoring in demanding production environments including:

• Post Production
• Music Recording and Mixing
• Film Editing
• DVD authoring and Mastering
• 5.1 Production (Audio or Audio for pictures)
• Broadcast
• Edit suites

Features

• 2x10" woofer, one 5.5" midrange and one 1.1 soft dome tweeter
• 192 kHz support via Dual Wire
• Advanced Bass Management, with selectable frequency crossover points
• Acoustic Placement Compensation
• Preset Storage and Recall
• Programmable reference levels
• Level alignment in 0,1dB steps
• +/- 0.2dB precision alignment
• Integrated Parametric EQ's and Delay in each monitor (PC-IP only)Central and Remote control of system and parameters
• Direct Digital inputs and Analog inputs (optional)
• Networking in-between all AIR components
• 221 (two-to-one) design - Integrating unique Tweeter and Midrange technology
• Four times 300-watt amp package

General Specifications

• System: 3-way Active Nearfield monitor
• Frequency response: 28 Hz –22 kHz
• Max SPL 1m pair (IEC Short term): 134 dB peak
• Max SPL 2m 5.1 (IEC Short term): 132 dB peak
• Max SPL 1m (IEC Long Term): 107 dB RMS
• Precision of monitor matching: +/- 0.2 dB
• Port tuning frequency: 35 Hz
• Internal cabinet volume: 68 liters
• Bass principle: Bass reflex
• Crossover frequency: 400 Hz (DSP generated) and 2400 Hz (DSP generated)
• Crossover slope: (LF/MF, MF/HF) 12/6 dB/Oct, 12/6 dB/Oct
• Tweeter: Esotar 1.1" soft dome, neodymium magnet, rear chamber, magnetic fluid, 4mm steel front, pure alu wire voice coilcr
• Midrange: 5.5", one-piece molded polyprop cone, 38 mm / 1.5" pure alu voice coil
• Woofer: 2 x 9.5", one-piece molded polyprop cone, 100 mm / 4" pure alu voice coil
• Mains Voltage: 100 to 240 VAC, 50 to 60 Hz (select)
• Power Consumption Idle: 45 W @ 1/8 max power (IEC 60065)
• Finish Amp: Black painted back plate
• Finish Cabinet: Black ash with dark gray MDF baffle
• Dimensions (H x W x D): 20” x 21” x 17.7”
• Depth incl. amp and driver: 19.3”
• Weight: 100 lbs

Amplifier Specifications

• Tweeter: 300 W amp
• Midrange: 300 W amp
• Woofer: 2 x 300 W amp
• Internal sample rate: 192 and 176,4 via Dual Wire (optional Digital Card required) and 96, 88.2, 64, 48, 44.1 or 32 kHz

AIR Masters

• I/O Connectors: XLR (2 channels AES/EBU in) 3 x RJ45 proprietary TC LINK
• Formats: AES/EBU (24 bit)
• Word clock input: BNC, 75 Ohm, 0.6 to 10 Vpp
• Display: 2 x 16 character dot matrix
• Operation: Menu system / four buttons

AIR Series goes far beyond conventional monitor performance – both in terms of sound, operation and thinking. Consisting of a number of intelligent components that communicates through a network, an AIR system always adds up to a complete and integrated solution for critical monitoring. This both for stereo and multichannel systems.

All components in an AIR system are connected through the TC Link network that distributes control information as well as Audio in-between all system components. This makes it possible to control a multichannel system from the sweet spot using the AIR Remote or the AIR Soft. This combined with "local intelligence" inside each monitor and subwoofer, provides AIR series with powerful integrated features.

Our Part #  AIR-25-DIGITAL-MASTR