Dynaudio Acoustics AIR-20-DIGITAL-MASTR
Monitor, 3-way Active Nearfield, 10" Woofer, 5.5" Midrange, 200W PWM, Digital Inputs, Master Unit

AIR-20-DIGITAL-MASTR

3-way Active Nearfield, 10" woofer, 5.5" one-piece molded polyprop midrange & 1.1 soft dome tweeter.

The AIR 20 offers transparency, consistent speaker performance and outstanding possibilities for optimizing performance in different Acoustical environments. The AIR 20 is developed for both stereo and multi-channel monitoring in demanding production environments including:

• Post Production
• Music Recording and Mixing
• Film Editing (smaller rooms)
• DVD authoring and Mastering
• 5.1 Production (Audio or Audio for pictures)
• Broadcast
• Edit suites

Typical listening distance 5-10 ft. Typical room size 2800-4600 ft3.

Features

• 10" woofer, 5.5" midrange and 1.1 soft dome tweeter
• 192 kHz support via Dual Wire
• The new 221 (two-to-one) design - Integrating unique Tweeter and Midrange technology
• Bass Management, with selectable frequency crossover points
• Advanced Bass Management
• Acoustic Placement Compensation
• Preset Storage and Recall
• Programmable reference levels
• Level alignment in 0,1dB steps
• All Monitors aligned within +/- 0.2dB precision
• Integrated Parametric EQ’s and delay in each monitor (only accessible with PC-IP)
• Central and Remote control of system and parameters
• Direct Digital inputs and Analog inputs (optional)
• Networking in-between all AIR components
• Dedicated AIR Base subwoofers
• Two times 200-watt amp package in each monitor

General Specifications

• System: 3 way semiactive NearField Monitor
• Total frequency response: 31 Hz –22 kHz:
• Max SPL 1m pair (IEC Short term): 131dB peak
• Max SPL 2m 5.1 (IEC Short term): 129dB peak
• Precision of monitor matching: +/- 0.2 dB
• Port tuning frequency: 40 Hz
• Internal cabinet volume: 35 liters
• Bass principle: Bass reflex
• Crossover frequency: 390 Hz and 2600 Hz
• Crossover slope: 12 dB/oct and 6 dB/oct
• Tweeter unit: Esotar T 380D: 1.1" soft dome, neodymium magnet, rear chamber, magnetic fluid, 4mm steel front, pure alu wire voice coil
• Midrange unit: 5.5", one-piece molded polyprop cone, 38 mm / 1,5" pure alu voice coil
• Woofer: 9.5", one-piece molded polyprop cone, 100 mm / 4" pure alu voice coil
• Mains Voltage: 100 to 240 VAC, 50 to 60 Hz (auto-select)
• Power Consumption Idle: 50 W / Max: 375 W
• Finish Amp: Black painted back plate
• Finish Cabinet: Black ash with dark gray MDF baffle
• Dimensions (H x W x D): 575 x 310 x 395 mm
• Depth incl. amp and driver: 432 mm
• Weight: 28 kg

Amplifier Specifications

• Midrange/Tweeter: Separate 200W PWM amp
• Woofer: Separate 200W PWM amp
• Internal sample rate: 96 kHz (except when slaved to digital input or Word clock Input)
• External sample rate:  96, 88.2, 64, 48, 44.1 or 32 kHz

AIR Masters

• I/O Connectors:  XLR (2 channels AES/EBU in) 3 x RJ 45 proprietary TC Link
• Formats: AES/EBU (24 bit)
• Word clock input: BNC, 75ohm, 0.6-10 Vpp
• Display: 2 x 16 character dot matrix
• Operation: Menu system / Four bottoms

AIR Series goes far beyond conventional monitor performance – both in terms of sound, operation and thinking. Consisting of a number of intelligent components that communicates through a network, an AIR system always adds up to a complete and integrated solution for critical monitoring. This both for stereo and multichannel systems.

All components in an AIR system are connected through the TC Link network that distributes control information as well as Audio in-between all system components. This makes it possible to control a multichannel system from the sweet spot using the AIR Remote or the AIR Soft. This combined with "local intelligence" inside each monitor and subwoofer, provides AIR series with powerful integrated features.

Our Part #  AIR-20-DIGITAL-MASTR